[RTTY] My FT-950's RTTY power level admonition

[Glenn Wyant]

For contests where the exchange remains constant
eg.  599 VT  599  ON  etc, you can program them
using the memory buttons  1 -  4

The only problem is the RTTY takes forever flipping back to RX
This tail can be shortened by adding an  ..--   at the end of each
memory message.

The messages are stored by using your keyer on cw , and then they
will reproduce on RTTY mode.

Its in the K3  manual.

va3dx


----- Original Message ----- 
From: "Ian White" <gm3sek at ifwtech.co.uk>
To: <rtty at contesting.com>
Sent: Tuesday, February 16, 2016 6:17 PM
Subject: Re: [RTTY] My FT-950's RTTY power level admonition


> Everybody has to start somewhere, so we can only hope that newcomers
> using the K3/K3S/KX3 quickly realise that direct paddle/keyboard input
> is not the best way to enjoy RTTY contesting. 
> 
> The main point is to remind those Elecraft users that they *already* own
> a world-class radio for RTTY contesting. All that's missing is to
> realize its full potential, so if they come back next time with a
> computer hooked up and well-configured RTTY and contesting software,
> they're going to have a lot more fun!
> 
> 
> 73 from Ian GM3SEK
> 
> 
> _______________________________________________
> RTTY mailing list
> RTTY at contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>