[RTTY] N1MM Logger macro problem resolved- Thanks!

[RLVZ at aol.com]

Guys,
 
Thanks for all the helpful replies about my F2 macro problem while using  
Logger+ in the "run" mode.  The problem was easily resolved by adding the  
{Enter} to the F5 macro.   I'm looking forward to trying it out during  the 
BARTG RTTY Sprint on Jan. 23rd!
 
Thank You for this very helpful reflector!
 
73,
Dick- K9OM
 
 
 
 
In a message dated 1/4/2016 5:55:44 P.M. Eastern Standard Time,  
rtty-request at contesting.com writes:

Message:  5
Date: Mon, 4 Jan 2016 17:33:16 -0500
From: Richard Ferch  <ve3iay at storm.ca>
To: "rtty at contesting.com"  <rtty at contesting.com>
Subject: Re: [RTTY] N1MM Logger+ RTTY macro  question
Message-ID: <568AF32C.2070103 at storm.ca>
Content-Type:  text/plain; charset=utf-8; format=flowed

Dick, Salvo has hit the nail  on the head. You need to look at both F5 
and F2 messages.

When you  are using ESM, pressing Enter to send the exchange while you 
are running  sends both F5 and F2. You can do as Salvo suggests and leave 
F5 empty and  put everything into F2, or you can do what I do:

F2 Run  Exch,{TX}{SENTRST} {EXCH} {EXCH} ! {RX}
F5 His Call,{TX}{ENTER}  !{RX}

Either way will start the received exchange on a new line,  starting with 
his call sign once followed by the rest of the exchange. The  difference 
only shows up when you want to send the message again for some  reason 
(pressing F2 vs. the = key gives a choice of two different  behaviours in 
my version, whereas they are both the same in  Salvo's).

73,
Rich  VE3KI