[RTTY] N1MM Exch Message when using ESM?

[David Levine]

I experienced this a couple times during the contest. I don't use the
keyboard much and do it all with the mouse, but the "Right click=Enter"
option should duplicate the experience.

I know why it occurs but not what I did to put the cursor into that
position. It happens when the cursor is in the call sign field when
Enter/Right Click is sent. I'm not sure what I did when clicking through
the other operators name/state. I only handled a hair over 300 calls in the
NAQP and it might have happened 5-8 times. Unfortunately, I'm not watching
the Entry window but watching the digital window so I'm not sure what I
did, assuming it's not an application issue, to cause it.

But you aren't alone if that makes you feel better.

David - K2DSL

On Mon, Jul 18, 2016 at 12:11 AM, RLVZ--- via RTTY <rtty at contesting.com>
wrote:

> Hi Guys,
>
> I was going to post my question on the N1MM logger+ Digital reflector,  but
> since Don brought up a related subject, and since rtty at contesting  .com is
> easier for me to post messages on, I'd like to ask the following  question
> about N1MM Logger+:
>
> For this weekends NAQP-RTTY Test, I was using N1MM Logger+ V.1.0.5785.0
> (which I believe is the latest version) and using ESM.  ESM worked
> flawlessly
> when running stations.  But while hunting MULTS in  S&P mode I frequently
> had problems.  After entering the other stations  Callsign in the Callsign
> field and pressing "Enter" the first time, ESM would  always send my
> Callsign
> just as it should.   But after filling the logging fields with the proper
> received message  and then pressing "Enter" the second time in order to
> send
> my  exchange and automatically log the Qso, about 30% of the time  Logger+
> sent my Callsign again rather than sending my report and logging  the Q.
> That
> really messed me up and may have cost  me logging some Q's because of it.
> So I'm wondering if  anyone else experienced a  similar problem?
>
> Thanks & 73,
> Dick- K9OM
>
>
>
> In a message dated 7/17/2016 11:16:18 A.M. Central Daylight Time,
> rtty-request at contesting.com writes:
>
> Message:  1
> Date: Sat, 16 Jul 2016 17:58:33 -0500
> From: "Don Hill AA5AU"  <aa5au at bellsouth.net>
> To: "'RTTY Reflector'"  <rtty at contesting.com>
> Subject: [RTTY] N1MM Exch Message when using  ESM?
> Message-ID:  <000d01d1dfb5$950bfb00$bf23f100$@net>
> Content-Type: text/plain;   charset="us-ascii"
>
> OK, I give up. How do your properly set up  your F2 (EXCH) RUN message when
> using ESM?
>
> I want to send the other  station's callsign ONCE with my report starting
> on
> a new  line.
>
> Thanks,
> Don  AA5AU
>
> _______________________________________________
> RTTY mailing list
> RTTY at contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>