[RTTY] Flex 6300 in low power RTTY contests; Maestro

[Jurgen Geldhof]

I have run my FT990 at full power in contests for the last 20 years.

The probe I clipped to the heatsink shows a higher temp when leaving the 
rig in RX for a while than when I am running in a contest.


Op 3/06/2016 om 19:16 schreef john at kk9a.com:
> For contest QSO's I have run a Yaesu FT1000MP and an Elecraft K3S at full
> power for many hours straight with no noticeable heating or other issues.
>
> John KK9A-W4AAA
>
> To:	Ktfrog007 at aol.com
> Subject:	Re: [RTTY] Flex 6300 in low power RTTY contests; Maestro
> From:	Stanley Zawrotny <k4sbz.stan at gmail.com>
> Date:	Thu, 2 Jun 2016 15:46:36 -0400
> List-post:	<rtty at contesting.com">mailto:rtty at contesting.com>
> No xcvr should be run at more than 50% power for RTTY.
>
> Stan, K4SBZ
>
> "Real radio bounces off the sky."
>
> _______________________________________________
> RTTY mailing list
> RTTY at contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>
>

-- 

73


Jurgen Geldhof
ON5MF / OQ6A

------------------------------------------------------------------------

	www.on5mf.be <http://www.on5mf.be> 	www.geldhofhout.be 
<http://www.geldhofhout.be> 	

------------------------------------------------------------------------