[RTTY] Rigblaster Pro RTTY Question

Rich rwnewbould at comcast.net
Sun Jun 5 19:32:20 EDT 2016


I am not that familiar with a 7700, but on my ProIII and II I use the 
RJ45 from the RB to the mic connector of the radio.  The Mic connector 
is the path for the PTT.   If there is another way then I am not aware 
of the type of hook up.


Rich


On 6/5/2016 13:01 PM, Phil wrote:
> I am using N1MM to connect to a Rigblaster Pro via two WMR USB/serial
> cables,
>
> When trying to send an FSK RTTY message the following occurs:
>
> Hear a relay "click" from the RB.
>
> RB Green CS LED comes on.
>
> RB Red PTT comes on.
>
> RB Red FSK comes on and blinks to follow RTTY data.
>
> RIG IS NOT PUT IN TRANSMIT MODE.
>
> If I manually activate rig, RTTY signal is transmitted.
>
>   
>
> RB is connected to IC-7700 Aux port and CI-V.
>
> No Mic connection.
>
> Does anyone know the path of the PTT signal from the RB to the 7700?
>
>   
>
> As info, Rig Control works fine on RB connector B and all worked fine before
> change from true serial cables to USB/serial cables.  Also changed PC and
> software from Writelog to N1MM.
>
> Thanks.
>
> Phil
>
> WA2LXE
>
> wa2lxe at optonline.net <mailto:wa2lxe at optonline.net>
>
>   
>
>   
>
> _______________________________________________
> RTTY mailing list
> RTTY at contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>



More information about the RTTY mailing list