[RTTY] I am having a devil of a time...

[Thom]

Well partial success...downloaded extfsk64 and set that up in MMTTY and 
now my TI-8 keys the radio in FSK.

Now to make it diddle and actually send FSK RTTY.

73


On 11/2/2016 02:43, Thom wrote:
> I have a Kenwood TS-570D...connected to that radio is a Rigexpert TI-8 
> Digital interface.  The interface is connected to the radio using a 
> Rigexpert custom cable made for the 570D.  ACC2 is being used for FSK 
> operations
>
> Radio Mode is set to FSK
>
> PTT is on Com5
>
> FSK is on Com6.
>
> Both these ports are Virtual Com Ports
>
> I have set up MMTTY according to the instructions in the TI-8 
> documentation.
>
> Soundcard set to USB Audio Codec for reception and transmission.
>
> In TX     PTT and FSK set to Com 6
>
>  In Radio Command         Port = Com5       8, 2, none   Kenwood group 
> selected.
>
> in MISC   TX port set to Com-TxD(FSK)  USB set to Limiting speed. I 
> have tried all 3 selections in this box.
>
> I cannot get MMTTY to key the radio.
>
>
> Anyone using this Interface (TI-8) that can give me a hand?
>
> Thanks
>

-- 
73

Thom KI8W

"Living deep in the black hole of RF"