[RTTY] N1MM+ on RTTY

[Joe Subich, W4TV]

> I think Writelog was causing the problems I was whining about
> earlier. I probably had it totally screwed up in the setup.

Probably because you don't understand the way WriteLog generates
FSK.  With the addition of the MMTTY.ocx interface, there are two
ways to get FSK from Writelog/MMTTY:

1) Let WriteLog generate FSK by setting the FSK port in Rttyrite
    and selecting "hardware generated FSK" (for true UART ports)
    or "software generated FSK" (for USB ports and hardware devices
    like RigExpert or US Interface).
2) Let MMTTY generate FSK by setting the FSK Port in Rttyrite to
    *NONE* and configuring the PTT & FSK port in MMTTY as if you
    were running MMTTY standalone.

I suggest you study Don's excellent Writelog and RTTY tutorials.

73,

    ... Joe, W4TV

On 11/7/2016 9:58 PM, Thom wrote:
> I just spent a couple of hours and using the excellent, step by step,
> guide I got N1MM+ setup and working great on my TS-480.  It was really
> easy.  Here is the link to it.
> http://www.rttycontesting.com/tutorials/n1mm/plus/
>
> Thanks Don.
>
> I think Writelog was causing the problems I was whining about earlier.
> I probably had it totally screwed up in the setup.
>
> Planning on the Sprint Friday (UTC) and then the contest this weekend.
>
> Now to work on the QTC issue.
>
> 73
>
> Thom KI8W
>
> good night all.
>
>
>
> _______________________________________________
> RTTY mailing list
> RTTY at contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>