[RTTY] N1MM Challenges

[Peter Schollema]

Pherhaps this wil help
http://www.pa1m.nl/pa1m/setup-pa1m-current/

Peter PA4O

> I have done my best to configure MMTTY to use with N1MM. However, I 
> have two questions.

As always, *please* read the configuration example for MK II and N1MM+
available in Router (Help | Download Documents) or online in the MK II area
at www.microHAM-USA.com/support.html.

There are multiple configurations for MMTTY and/or MMVARI - all of which are
documented in the example.  If you are hearing PSK31, it is likely that you
are using MMVARI instead of MMTTY and have not set the N1MM "Mode Control"
tab correctly for your transceiver (see the
N1MM+ on-line documentation for information on Mode Control -> Mode
sent to radio and the "Digital Modes" tabs).

 > 2.       2.  Any assistance on how to configure RTS and DNR would be
 > appreciated.

Set both to "ALWAYS OFF".  N1MM+ will provide digital mode PTT on the FSK
port (if MMTTY is configured correctly) and CW/SSB PTT using the WinKey PTT
line as documented in the N1MM+/MK II configuration example.

73,

    ... Joe, W4TV

On 11/17/2016 2:24 PM, Bob Garrett wrote:
> Hi Listers,
>
>
>
> Been a WL user for many years.  Now venturing in to N1MM.  So far, the 
> experience has been a good one although there is certainly a rather 
> steep learning curve.
>
>
>
> I have done my best to configure MMTTY to use with N1MM.  However, I 
> have two questions.
>
> 1.        Where do I set the soundcard parameters?  Currently, when I
press
> any of the "F" keys for macros, I get diddles on the air and a psk31 
> transmission through my computer sound card.  I'm thinking I may have 
> a incorrect "mode" setting on the config but not sure.
>
> 2.       2.  Any assistance on how to configure RTS and DNR would be
> appreciated.  I using a Microham MK II, FTDX5000 and MMTTY for my RTTY 
> program.  Not quite sure on PSK as of this writing.
>
> Any help appreciated.  I'm a blind ham so please be very clear on any 
> instructions.  Works great on CW in the SO1R2V setting.  Very cool.  
> 73, Bob K
>
>
>
> _______________________________________________
> RTTY mailing list
> RTTY at contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>
_______________________________________________
RTTY mailing list
RTTY at contesting.com
http://lists.contesting.com/mailman/listinfo/rtty