[RTTY] Well darn...

[Al Hanzl]

Ok. Tnx much. 
Al
K2AL

Sent from my iPhone

> On Oct 13, 2016, at 9:50 PM, Richard Ferch <ve3ki at rac.ca> wrote:
> 
> K2AL asked:
> 
> How do I adjust the 2.1 offset frequency in N1MM+?
> 
> Answer: You don't. You can turn the offset calculation on or off, but you
> can't adjust it.
> 
> N1MM+ knows which sideband your rig is on (USB or LSB), and it knows the
> audio mark frequency the digital "engine"(e.g. MMTTY) is using. If the
> offset option is turned on, N1MM+ adds (USB) or subtracts (LSB) the audio
> mark frequency to/from the dial frequency to come up with the actual
> transmitted mark frequency.
> 
> You turn the option on (for modes like USB/LSB where the dial displays the
> suppressed carrier frequency) or off (for modes like FSK where the dial
> displays the actual mark frequency) by using the Digital Interface window's
> Setup menu. The option is called Turn AutoTRXUpdate On/Off.
> 
> 73,
> Rich VE3KI
> _______________________________________________
> RTTY mailing list
> RTTY at contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty