[RTTY] rtty set up

[Joe Subich, W4TV]

What are the "Default Device" and "Default Communications Device" (if
shown) on the Windows Sound Control Panel "Recording Devices" tab?

To what is the FTdx5000 Menu 098 RTTY Tone set?  What is the MARK in
MMTTY?  Are they the same?

Is the AF Out plug seated fully (firmly) in the AF Out jack on the
back of the FTdx5000

73,

    ... Joe, W4TV



On 1/17/2017 3:37 PM, Courtney Judd wrote:
> RTTY still not working since swapped over to FT5000... win 10, microHam
> router with microkeyer2, stand alone mmtty. Option tab in mmtty... sound
> card tab shows Reception as Line-in; Transmision shows Headset earphone.
>> From task bar sound shows: Playback= speakers as default device, headset
> earphone as ready. Recording tab = Line-in as ready, headset microphone
> as un-available. Volume mixer shows
> speakers, system sounds, line in, and microham device router. All
> sliders are at max. Looking in device manager all devices are enabled.
> Problem seems to be low or no output for line-in. I can get activity by
> changing line-in to microphone but printing doesn't work very well. i
> know that is not the right way... should come thru line-in. I just don't
> know what else to change or even where to look! Any ideas or suggestions
> would be of great help! Thanks, Cort K4WI
> _______________________________________________
> RTTY mailing list
> RTTY at contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>