[RTTY] Information please

[Mark]

Dick,

You might try Olivia. You can enjoy a ragchew type QSO instead of the 
fixed format of JT65. I normally run about 25 watts to a tribander and 
find that works well. I use Fldigi software.

73, Mark K5XH

On 5/25/2017 8:42 PM, Richard White wrote:
> I am working RTTY about 90% of the time now as I can't copy  CW as I once
> did.  With propagation as bad as it is I am considering buying an amp. Have
> not had one for over 15 years. On RTTY I can copy many calls but they can't
> copy my 75 watt signal on my 4 element beam and that is frustrating.
>
> With a limited budget I am considering a AL-811H or the AL-811.  I would
> like to know how either rig works with RTTY. Also how much  output power
> from the rig do they need to get 200 or 300 watts from the amp.  Also, the
> Ameritron  video on the 811H shows using an interface to protect the radio.
> Is this really necessary?
>
>   
>
> Replies appreciated....   Dick   KS0M
>
>   
>
> Richard C. "Dick" White
>
> Fulton, MO 65251 U.S.A
>
> Amateur Radio Station  KS0M
>
>   
>
> _______________________________________________
> RTTY mailing list
> RTTY at contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty