[RTTY] MMVARI and 2Tone (stand-alone?)

[David G3YYD]

In N1MM+ whatever is in the main Di window is the TX software. The
additional RX windows are RX only. So to use 2Tone for TX in N1MM+ need to
make it the main Di window software.

73 David G3YYD

-----Original Message-----
From: RTTY [mailto:rtty-bounces at contesting.com] On Behalf Of Dave AA6YQ
Sent: 11 November 2017 08:40
To: 'Aleksander Otulak'; rtty at contesting.com
Subject: Re: [RTTY] MMVARI and 2Tone (stand-alone?)

>>>AA6YQ comments below

-----Original Message-----
From: RTTY [mailto:rtty-bounces at contesting.com] On Behalf Of Aleksander
Otulak
Sent: Saturday, November 11, 2017 3:31 AM
To: 'Joe Subich, W4TV'; rtty at contesting.com
Subject: Re: [RTTY] MMVARI and 2Tone (stand-alone?)

Thanks for the info. However, I am a bit confused.

In AFSK,
if one starts 2Tone within N1MM+ MMTTY interface (or WinWarbler, etc.),
which one does the transmitting 2Tone or the MMTTY, please?

>>>In WinWarbler, 2-Tone is "receive only"; it is not used for 
>>>transmission. AFSK or FSK transmission can be accomplished via the
MMTTY engine, via an external modem (KAM, PK232, etc), or via an Elecraft
K3.

Once, I was told that in such a tandem 2Tone just copy the receiving part,
while MMTTY does both transmitting and an independent (from 2Tone)
receiving.

>>>That's correct for WinWarbler. 

>>>WinWarbler can also display RTTY decoded from a third source in 
>>>addition to 2-Tone and MMTTY: an external modem, an Elecraft K3,
or VE3NEA's GRITTY application.

        73,

             Dave, AA6YQ


_______________________________________________
RTTY mailing list
RTTY at contesting.com
http://lists.contesting.com/mailman/listinfo/rtty