[RTTY] Intel NUC, anyone?

[Joe Subich, W4TV]

Edgeport is the only maker of USB to Serial converters that I know of
that properly support low (45, 50 and 75 baud) data rates.  Again, their
converters are microprocessor based with a hardware bit clock.  It is
not necessary to use EXTFSK or other software FSK "drivers" with the
Edgeport products.

73,

    ... Joe, W4TV


On 10/27/2017 10:42 AM, Jim McDonald wrote:
> Would an Edgeport USB-to-serial adaptor work?
> 
> 73,  Jim N7US
> 
> -----Original Message-----
> 
> Hi Peter,
> 
> Have you looked into TinyFSK?
> 
> http://www.frontiernet.net/~aflowers/tinyfsk/
> 
> I was looking into doing something similar as you with either a small form
> factor PC, cheap laptop or some other device (which I still have to get).
> Realizing that they would not have a serial port for FSK keying, I built an
> interface that included the TinyFSK. It worked very well for me. I used it
> with the N1MM logging software for some contesting as well.
> 
> 73,
> --Alex KR1ST
> 
> 
> On 2017-10-25 22:31, Peter Laws wrote:
> 
>> Now my problem is that the NUC has no serial ports.
> 
> 
> _______________________________________________
> RTTY mailing list
> RTTY at contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>