[RTTY] N1MM+ and Waterfall Bandmap

[John Barber]

N2ICs WB is up and running fine with the SDRplay already. What do I need to set up in N1MM+?
John GW4SKA

-----Original Message-----
From: k8ut at k8ut.com [mailto:k8ut at k8ut.com] 
Sent: 27 October 2017 17:53
To: John Barber <john at bordertech.co.uk>; rtty at contesting.com
Subject: Re: [RTTY] N1MM+ and Waterfall Bandmap

John,

The current version of N1MM+'s Spectrum Display requires an input signal from an Icom CAT array of data points. It was designed for the new Icom radio's built-in spectrum processor. Your SDRplay outputs an incompatible IF/IQ signal.

N2IC's Waterfall Bandmap program - itself a valuable tool for N1MM contesters - includes the IF/IQ -to- CAT translator required by Spectrum Display to allow non-new-Icom radios to use the Spectrum Display. You have to first get WB running before trying to get SD to work.

-larry (K8UT)

------ Original Message ------
From: "John Barber" <john at bordertech.co.uk>
To: rtty at contesting.com
Sent: 2017-10-27 12:29:38
Subject: [RTTY] N1MM+ and Waterfall Bandmap

>Maybe someone here can answer a question about N1MM and the spectrum 
>display. I know there is a N1MM group but I have never used it so am 
>trying here first!
>
>I have Waterfall Bandmap set up with an SDRPlay RSP1 and it works fine. 
>My
>problem is that the N1MM Spectrum Window doesn't see the RSP1 as an 
>option when selecting the spectrum source. The N1MM help file says to 
>open N1MM first, then Waterfall Bandmap, then open the spectrum window.
>
>How do I get the RSP1 to send an ident to N1MM, or otherwise get them 
>connected?
>
>John GW4SKA
>
>
>
>
>
>---
>This email has been checked for viruses by AVG.
>http://www.avg.com
>_______________________________________________
>RTTY mailing list
>RTTY at contesting.com
>http://lists.contesting.com/mailman/listinfo/rtty