[RTTY] Intel NUC, anyone?

[Dave AA6YQ]

>>>AA6YQ comments below

-----Original Message-----
From: RTTY [mailto:rtty-bounces at contesting.com] On Behalf Of Peter Laws
Sent: Friday, October 27, 2017 11:34 AM
To: alex at kr1st.com
Cc: RTTY contest group
Subject: Re: [RTTY] Intel NUC, anyone?

On Fri, Oct 27, 2017 at 9:17 AM, Alex <alex at kr1st.com> wrote:
> Hi Peter,
>
> Have you looked into TinyFSK?
>
> http://www.frontiernet.net/~aflowers/tinyfsk/
>
> I was looking into doing something similar as you with either a small 
> form factor PC, cheap laptop or some other device (which I still have to get).
> Realizing that they would not have a serial port for FSK keying, I 
> built an interface that included the TinyFSK. It worked very well for 
> me. I used it with the N1MM logging software for some contesting as well.
>

Seen it go by here many time ... and never looked into it.  An Arduino nano board is, like, $12.  I think this is where I will go
for FSK. Not clear on how MMTTY (in N1MM or in WinWarbler or by itself) talks to it

>>>On the "External Modem" tab of WinWarbler's Configuration window, set the "Model" selector to "tiny FSK". The full set of
step-by-step instructions are here:

<http://www.dxlabsuite.com/dxlabwiki/ExternalModemControl>

       73,

              Dave, AA6YQ