[RTTY] FSK Keying of TS-590SG

[Jim W7RY]

I use 4N33 opto isolators. Which is a Darlington unit.

Have an LED and a 470 ohm all in series between the serial port and the 
optoisolator.

73
Jim W7RY


-----Original Message----- 
From: Bob Burns W9BU
Sent: Friday, February 23, 2018 4:53 PM
To: rtty at contesting.com
Subject: Re: [RTTY] FSK Keying of TS-590SG

On 2/23/2018 2:49 PM, groupsrichart at gmail.com wrote:
> I have tried two different interfaces using optoisolators to attempt FSK 
> and PTT keying from a serial card to the rear panel ACC2 connector.

I used an interface very similar to this one
(http://www.w3yy.com/fsk.htm) for a few years with my Icom IC-7600. It
worked very well when driven by a real RS-232 COM port on a desktop
computer. I can't tell you the optoisolator part numbers, but it worked
very well for me.

Bob...
_______________________________________________
RTTY mailing list
RTTY at contesting.com
http://lists.contesting.com/mailman/listinfo/rtty