[SCCC] Custom VOX Audio Circuit Needed

[N6KI Dennis Vernacchia]

Thanks Dave,

Most of the circuit stuff I have seen for Gateway has been Junque
but will pass that on to anyone that wants to tackle the job

73, Dennis N6KI



At 06:39 PM 8/11/2006, you wrote:

>----- Original Message -----
>From: "N6KI Dennis Vernacchia" <n6ki_73 at sbcglobal.net>
>To: <sccc at contesting.com>
>Sent: Saturday, August 12, 2006 1:25 AM
>Subject: [SCCC] Custom VOX Audio Circuit Needed
>
>
> >A ham friend contacted me asking if an external
> > VOX unit kit or built product was available for
> > his Kenwood TS-50S which he wants to use
> > with a Heil or similar headset.
> >
> > Something packaged in a small mini-box with a
> > 9V battery powered Op amp circuit I think should work fine
>------------------------
>Googling "vox kit" turned up a bunch, including two from
>Gateway Electronics:
>
>http://www.gatewayelex.com/kits4_F.htm
>
>Dave Hachadorian, K6LL
>Yuma, AZ
>
>_______________________________________________
>SCCC mailing list
>SCCC at contesting.com
>http://lists.contesting.com/mailman/listinfo/sccc