[SCCC] Wall Transformers and Low Power Line Voltage

[Bruce Elbert]

Art, thanks for mentioning this. Last night, I noticed that the output from
my 500W solid state linear was only 450 W or so - at full input. I checked
the line voltage, the likely cause, and it was 110 VAC, which I believe is a
tad low. 73, Bruce K6ZB

-----Original Message-----
From: sccc-bounces at contesting.com [mailto:sccc-bounces at contesting.com] On
Behalf Of Doug Brandon N6RT
Sent: Tuesday, July 25, 2006 10:25 AM
To: SCCC
Subject: Re: [SCCC] Wall Transformers and Low Power Line Voltage

I have the opposite problem the past three days, I have 140v on my mains!

   73 de Doug, N6RT


At 10:21 AM 7/25/2006 -0700, Art - W6KY wrote:
>Something I experienced this weekend (which I'm sure a lot of you
>have already taken care of) is my SDG&E AC line voltage dropped
>to 98 volts.

_______________________________________________
SCCC mailing list
SCCC at contesting.com
http://lists.contesting.com/mailman/listinfo/sccc