[SCCC] Garage Sale of Ham Gear by AD6ZJ

[Dennis Vernacchia]

Loren AD6ZJ in Vista Ca  is selling off some Gear

See his List below

I have no pecuniary interest in this matter

73, Dennis N6KI
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Loren AD6ZHJ AD6ZJ at sbcglobal.net  wrote

I have been a pack rat for far too many years and have accumulated too much
old stuff.
I've gotten to the point where all the cool treasures are taking up space
and the ham shack is not as enjoyable as it should be.
I have decided to thin things out a bit so I can have room to enjoy the
stuff I keep.

Any somewhat reasonable offer will be accepted. I'm not giving the stuff
away but I'm not looking for Ebay or even EHAM prices.

The list:
Henry 2K2 HF Amplifier RF deck - No tubes - No power supply or console base
but fairly complete RF deck. A conversion to 3-500Z tubes has been started
but not completed (the original 3-400's are no longer available). The tubes
are in my other Henry 2K2 which I still get some use out of. This is a nice
starting point if you wanted to build an amp.

Big heavy home built high voltage power supply suitable for a plate supply.
Just finish the case and add a few relays for remote power on.  Has taps
for 2150VAC - 3600VAC at 360ma. Comes with heavy duty High voltage diode
blocks and a bank of 1000uf 450V capacitors and bleed resistors. The
transformer is about 10"x10" by 8" tall and has 11 ceramic insulated high
voltage taps.

Boonton Q Meter model 160-A Sort of works but I usually need to fox it
before I can use it.
Boonton Q Meter model 260-A Works on most bands but the selector switches
on these things are touchy
Boonton 103A12 Calibration coil 25uh (1.5 - 4.5 mhz)
Boonton 103A32 Calibration coil 2.5 MH (150 - 450 khz)

James G. Biddle Co. MEGGER - In original case with DC supply and manual -
Works well but the case has that musty aroma.

BC-186 Receiver - Looks clean and complete on the inside while the outside
shows it's age. I don't have the power supply

Hammarlund HQ-110 Receiver - Complete and in fair shape but could use some
going through

Hallicrafters S-27 VHF Receiver - Complete with all new Acorn tubes. Powers
up but no signals heard and I lost interest in fixing it because my work
bench is too small.
Hallicrafters S-27 VHF Receiver - Nearly complete - intended as a parts
unit for the one above.

If your interested in any of this stuff please email me directly at:
AD6ZJ at sbcglobal.net
If you know of someone who might be interested please feel free to forward
this email.
Depending on how this goes I will dig deeper into the abyss and pull out
some more stuff.

73
AD6ZJ, Loren