[SCCC] Icom 7600 with Henry 2K Classic (WB6L)

[Peter Putnam]

Ray,

The current required to key some Henry amplifiers far exceeds the 
current available from many new solid-state transceivers.

If your transceiver provides a source of 8 or 12 volts at the output 
connector, you might find this solid-state design useful.

http://ni6e.com/electro/Henry_Amp_Keying.html

73,
Peter
NI6E


On 4/29/2015 6:36 AM, Ray Biederman via SCCC wrote:
> Is anyone using an Icom 7600 (or similar) with a Henry 2K amplifier?  Are you going directly between the radio and amplifier with the relay cable or using some type of relay between the two.  If so what type of relay?  Ray  WB6L      wb6l at aol.com
>
>
> _______________________________________________
> SCCC mailing list
> SCCC at contesting.com
> http://lists.contesting.com/mailman/listinfo/sccc
>