[SCCC] FW: Competitive Contest Comparison - Flex vs Elecraft

Dennis Vernacchia n6ki73 at gmail.com
Wed Aug 23 16:48:39 EDT 2017

The FREE hat pushed me over the top to select the Elecraft !



On Aug 23, 2017 1:43 PM, "Dr. Howard S. White" <drpaper at kleega.com> wrote:


Pending arrival of the new 6000 series transceivers, I performed a
preliminary competitive comparison of the “K3S Contester and DXer” package
vs. a Flex-6600/Maestro package. I chose these packages to create a
“knobbed vs knobbed” comparison among two of the best high performance
transceivers on the market.  Neither package requires a separate computer
for basic local and remote operations, but both need a computer to support
some desirable capabilities.

Elecraft offers the discounted package with dual receivers and several
important options for $5900 ($300 discount) vs. $5200 for the Flex
6600/Maestro package (no discount).

While the K3S package is excellent, the Flex 6600/Maestro duo has several
features and capabilities that are not included in the Elecraft package.
Accordingly, I added extra cost options to match wherever possible the
features of the Flex-6600/Maestro package and as a result the cost of the
K3S package rose to $8090 vs. $5200 for the Flex package (rounded amounts
to next $5).

I’ve avoided comparing raw performance specifications, leaving that to Mr.
Sherwood and other experts to sort out and chose to focus mainly on
operating features, options and capabilities. But, I couldn’t cover
everything, so please pardon the absence of some distinctions between the
two radios.   I’ve tried to carefully verify all of this information,
however, should anyone discover an error, please let me know and it will be
promptly corrected.

K3S “Contester and DXer” package includes the following:

·        K3S-F 160-6M, 100 W Transceiver

·         Digital Voice Recorder

·         100W Internal Autotuner

·         2.8 kHz High Perf. SSB/Data Filter

·         2.1 kHz High Perf. SSB/Data Filter

·         400 Hz High Perf. CW/Data Filter

·         200 Hz High Perf. CW/Data Filter

·         High Perf. Subreceiver

·         2.8 kHz High Perf. SSB/Data Filter (for Subreceiver)

·         400 Hz High Perf. CW/Data Filter (for Subreceiver)

·         MH2 Hand Mic

·         P3 Panadapter

·         P3SVGA Video Adapter

·         Elecraft Hat

The Flex-6600/Maestro package includes the following:

 ·         Flex-6600 transceiver

·         Maestro control console

·         Hand microphone


The Flex-6600 does nearly all RX/TX filtering in software (except RX
preselectors and TX final bandpass) whereas the K3S employs conventional
and crystal filters to perform the same tasks.  While the K3S package comes
with a robust filter set, it does not include the AM/FM filter at $150.
Narrow filter options for CW and SSB on the sub-receiver, will cost an
additional $320. Also, for general coverage, you’ll need a bandpass filter
for $180. Again, these filters are added to approximately match the
capabilities of the Flex-6600.

Remote Operations

The Flex-6600/Maestro duo is designed for native remote LAN/WAN operations,
supporting nearly all functions with tactile and touch-screen controls and
a high resolution panadapter/spectrum display. The Maestro can connect to a
network via Ethernet cable or Wifi, while the radio is connected with
Ethernet cable only. Also, the 6600 can be operated remotely without the
Maestro using SmartSDR 2.0 software (SmartLink) on a Windows or IOS
computer connected to your LAN or the Internet.

The K3S requires a package of hardware for remote operations and provides
no remote panadapter display support.  The equipment includes RemoteRig
gear for $500, K3/0 mini control head for $700, plus cables and power
supply, totaling $1320. Unfortunately, the RemoteRig control site box does
not support WiFi.

Band Coverage

Both radios provide standard TX support for 160m-6m, while the K3S can
support 2m with an optional board (not included in package).  Both radios
have standard transverter I/O ports.

The K3S can monitor two bands and display spectrum for one band with the
P3, while the 6600 can monitor up to four bands (slices) and display the
spectrum for each on four separate panadapters (two on Maestro).  Both
provide general coverage (includes 630m and 2200m bands), but this
capability requires an optional filter with the K3S package. The Flex
covers down to 30 khz while the K3S covers down to 100 khz.

Both radios have dual receivers with separate antenna inputs and support
diversity reception.

Panadapter/Spectrum Display

The P3 display is small (4.5” approx.) with poor resolution (480x272) and
limited 200 khz bandwidth, while the Maestro display is much larger (8”),
has higher resolution (1280x800), numerous touch-screen controls and covers
up to 14 mhz bandwidth.

The P3 as optioned supports an external monitor while the Maestro does not.
Of course, the Flex provides native support for high resolution monitors at
no extra cost when the radio is operated with a computer instead of the

Digital Modes

The K3S has built-in, but limited support for PSK31 and RTTY modes (text
displayed on the front panel) with no requirement for external hardware or
software.  There is no provision for direct text input via a keyboard, so
text is entered real-time with a CW key (code translated to text) or as
macros in memory.  Full digital capability with keyboard input and GUI
requires a computer and third party software.

The 6600, when operated with Maestro, does not support digital modes,
however all digital modes are fully supported when operating the 6600 with
a computer running SmartSDR, third party software, DAX and SmartCAT.

No external sound card is necessary for either radio when operated with a

The K3S does not support DSTAR while the 6600 provides support with an
optional USB drive.  Also, Free DV support is included with the 6600
(waveform plug-in), but not the K3S.

Oscillator Stability

The Flex-6600 has a .5 ppm main TCXO (preliminary published spec) while the
K3S is rated at 5 ppm.  An optional high stability TCXO for the K3S will
nearly match the Flex-6600 at a cost of $120.

The 6600 has a standard 10 mhz input for external oscillator reference
control, while the K3S package needs an optional board for $100.

An optional internal GPSDO is available for the 6600, but not the K3S.

Digital Recorder

The KS3 digital voice recorder provides RX/TX recording capability (several
recordings for TX), while the 6600 provides only a single RX recording,
which can be played back in TX or RX mode.  The Elecraft DVR is more
capable and there is no comparable option available for the 6600 (third
party software solutions are feasible).

Both radios provide CW recording, macros and TX playback.


The Flex 6600 provides support for SO2R in one radio and full duplex (cross
band), while the KS3 provides neither.

Third Party Software Integration

With introduction of N1MM spectrum integration and spotting software into
SmartSDR 2.0, Flex has taken another big step in exploiting the tremendous
benefits of its networked architecture and sophisticated software APIs.
Elecraft is significantly behind in this area, offering no native network
interface for developers. It’s seems unlikely that the P3 will provide a
robust graphical user interface for third party apps.


The K3S package comes with an Elecraft hat, while customers must purchase
the Flex hat separately for $12 plus shipping.


The K3S “Contester and DXer” package is $5900. Additional K3S options to
match or partially match the Flex-6600 standard features are as follows:

$ 1320 Remote operations package

$ 150   FM/AM filter

$ 170  Narrow CW filter for subRX

$ 150  Narrow SSB filter for subRX

$ 100   10 mhz external reference oscillator input board

$ 180   General coverage bandpass filter

$ 120   high stability TXCO (1 ppm)


$2190 total

These items bring the K3S package to $8090 vs. the Flex-6600/Maestro
package at $5200. Again, this pricing was derived by matching features to
the extent possible. Some features, such as full duplex, SO2R in one radio
and native remote operation are currently not available from Elecraft.

I recognize that many of these "high" features may not be wanted or are
affordable for some hams. However, eliminating all of them from the
upgraded K3S package would still result in a cost difference of $700 in
favor of the Flex 6600/Maestro while retaining all the standard high
features in the Flex package.

If traditional knobs are not essential and you already have a decent
Windows or IOS laptop or tablet, the Maestro can be eliminated for a total
savings of $1900 whilst retaining a peerless panadapter/spectrum display,
native remote capability and several other features lacking in the K3S

Alternatively, the Flex-6600M alone would provide operational equivalency
in combination with a laptop or tablet (specifically for remote ops) for
$900 less than the K3S “Contester and DXer” package (with no add-ons).

I admire Elecraft and Flex and own quality products (6500 and KPA500) from
both American companies. With the arrival of the 6600/6400 radios and
SmartSDR 2.0 Flex has in my opinion taken the industry lead in value,
features, operating ergonomics and software integration. Competition is a
good thing for amateur radio and it inspires better and lower cost products
for us to enjoy.

Larry KB1VFU


Notify me when people reply<http://email.getsatisfaction.com/wf/click?
This message sent from the FlexRadio Systems community on Get Satisfaction.
To unsubscribe or change your email settings, click here<http://email.
2BPIwVuQ0fkCwolgO7ULtA1yXxQg-3D-3D>. Don't reply directly to this email.
Create a customer community<http://email.getsatisfaction.com/wf/click?
for your company at GetSatisfaction.com.

Posted by: "Dr. Howard S. White" <drpaper at kleega.com>
Reply via web post<https://groups.yahoo.com/neo/groups/sddxcnews/


Reply to sender <mailto:drpaper at kleega.com?subject=Re%3A%20Competitive%


Reply to group <mailto:sddxcnews at yahoogroups.com?subject=Re%3A%


Start a New Topic<https://groups.yahoo.com/neo/groups/sddxcnews/


Messages in this topic<https://groups.yahoo.com/neo/groups/sddxcnews/

Have you tried the highest rated email app?<https://yho.com/1wwmgg>
With 4.5 stars in iTunes, the Yahoo Mail app is the highest rated email app
on the market. What are you waiting for? Now you can access all your
inboxes (Gmail, Outlook, AOL and more) in one place. Never delete an email
again with 1000GB of free cloud storage.
Visit Your Group<https://groups.yahoo.com/neo/groups/sddxcnews/info;_ylc=
[Yahoo! Groups]<https://groups.yahoo.com/neo;_ylc=
• Privacy<https://info.yahoo.com/privacy/us/yahoo/groups/details.html> •
Unsubscribe<mailto:sddxcnews-unsubscribe at yahoogroups.com?subject=Unsubscribe>
• Terms of Use<https://info.yahoo.com/legal/us/yahoo/utos/terms/>


SCCC mailing list
SCCC at contesting.com

More information about the SCCC mailing list