[SCCC] FTdx3000 CAT
Hank Garretson
w6sx at arrl.net
Wed Oct 4 11:07:44 EDT 2017
My Eastside buddy W6PH normally uses WinTest which does not support the
California QSO Party.
Kurt wants to use N1MM+ this weekend.
When he fires up WinTest, both his K3 on COM9 and the FTdx3000 on COM1 are
interfaced. COM1 is standard-issue com port. COM9 is USB.
When he tries N1MM+, it sees the K3 on COM9, but not the FT.
He made no changes to the FT. He is using the N1MM+ suggested settings for
the FT.
Kurt says
I have the FTDX3000 configured as 38400. 8, N, 2. With Win-Test I use DTS
> and RTS "ALWAYS ON". I have tried "ALWAYS OFF" as well. I have confirmed
> that the FT menu shows 38400 baud and RTS is "ENABLE". I have the menu as
> "RS232c" not "USB" because I am using the RS232 port.
>
XP operating system.
Any ideas?
Contest Exuberantly,
Hank, W6SX
More information about the SCCC
mailing list