[SCCC] Fwd: Computer Audio and the Icom 7610

[Bruce Horn]

Marko, thanks for the suggestion to use the 7610's internal voice keyer. Are the keyer voice files processed by the same audio compressor and equalization as microphone audio on the 7610? Are the internal audio files in an editable format (e.g. WAV)?

73 de Bruce, WA7BNM   (bhorn at hornucopia.com)

----- Original Message -----
From: "marko n5zo" <marko.n5zo at gmail.com>
To: "SCCC Reflector" <sccc at contesting.com>
Sent: Sunday, October 29, 2023 10:59:37 PM
Subject: [SCCC] Fwd:  Computer Audio and the Icom 7610

It was mento to go to reflector…


Begin forwarded message:

> From: Marko Myllymaki <marko.n5zo at gmail.com>
> Date: October 30, 2023 at 1:57:54 PM GMT+8
> To: Ryan Huggins <KI6BTY at pm.me>
> Subject: Re: [SCCC] Computer Audio and the Icom 7610
> 
> Hello, that is correct, you should be able to adjust levels from computer.  I just used this method from n1mm+ to 7600 here at 9m6w first time ever, 9m6na helped me to set it up and it worked great.  But i wonder why you dont use 7610 internal voice keyer and just send command that is put in n1mm+ 
> Ssb message file for F key to play the message inside voice keyer of radio itself.   That is how i do it in home with 7610.  7600 that was available here does cannot receive that kind of command from computer, so i had to use method you are trying now with your 7610, but it would not be my choice to do it with 7610.
> 73 de Marko n5zo/ 9m6
>> On Oct 30, 2023, at 1:17 PM, Ryan Huggins via SCCC <sccc at contesting.com> wrote:
>> 
>> I do not have this experience, but as a computer geek I'd expect the adjustments would need to be made on the computer's sound output levels.  This is similar, in my mind, to how FT8 operates.  The output volume is driven by the computer's output sound levels.
>> 
>> 
>> -73
>> Ryan, KI6BTY
>> 
>> 
>> ------- Original Message -------
>>>> On Sunday, October 29th, 2023 at 8:48 PM, Bruce Horn <bhorn at hornucopia.com> wrote:
>>> 
>>> 
>>> Hi,
>>> 
>>> Does anyone have any experience adjusting the audio levels when interfacing computer audio with the Icom 7610? I've created audio files that were recorded at the appropriate level, but when played through the N1MM+ interface with the 7610, the level is significantly less than the audio from a microphone. I tried adjusting the various MOD level settings on the 7610, but varying them from 10% to 90% had no affect on the audio level. Any help would be appreciated. Thanks.
>>> 
>>> 73 de Bruce, WA7BNM (bhorn at hornucopia.com)
>>> _______________________________________________
>>> SCCC mailing list
>>> SCCC at contesting.com
>>> http://lists.contesting.com/mailman/listinfo/sccc
>> 
>> _______________________________________________
>> SCCC mailing list
>> SCCC at contesting.com
>> http://lists.contesting.com/mailman/listinfo/sccc
_______________________________________________
SCCC mailing list
SCCC at contesting.com
http://lists.contesting.com/mailman/listinfo/sccc