[SD-User] V11.13 Released

[Paul O'Kane]

V11.13          24th February 2005

SDU - UBA Contest:
    Fixed dupe warning with ON stations - callsign did
    not change to red.

    Fixed untidy display of stations worked on other
    bands.

ARRL DX Contest.
    For W/VE entrants (Type 0), W/VE calls change to
    red, score 0 points and do not count as mults. 

    For non-W/VE (Type 1) the ADIF option in SDCHECK
    now distinguishes between American States and
    Canadian Provinces.

Band Mapping:
    Added to SDX - using parallel port pins 2, 7, 8
    and 9 - same standard as other contest loggers.

SD - Callsign Repeat.
    The " character will repeat the callsign from the
    previous QSO. It's useful when you change bands to
    work the same station.  It's a substitute for the
    older Q command (which still works), but you don't
    have to press Enter.

    Note:  This is not an option if you have FORCENUM
    enabled - see the notes for V11.11. 

SO2R:
    Improved visual indication of which radio is
    active.  Pin 6 on the parallel port is ON when
    radio 2 is active.

AUTOCW:
    Band changes disabled AutoCW when the AutoCW
    range (see 11.07) was anything other than zero.
    Fixed.

    When AutoCW is enabled, and the status line
    (showing ACW) is hidden by .LST file data, the
    letter "A" is shown at the end of the data.

WinKey:
    If you had selected a mode other than Iambic B,
    Winkey reverted to Iambic B after playing any
    memory which included a # parameter. Fixed.

    Added some WinKey control parameters to SD.INI.
    These control the Dot/Dash ratio, Farnsworth
    threshold, and iambic switchpoint.  They can
    be ignored unless you want to experiment - in
    which case you should read the WinKey manual to
    see what they do (www.k1el.com).

STATUS Command:
    Updated to show all relevant WinKey parameters.

Rig Control:
    FT897.SD added - Thanks ZL2ARN.


V11.12          23rd February 2005

SDU and SDC - UBA and Commonwealth Contests.
    Fixed keyer serial numbers - #S parameter.

____________________________________________________

The programs are freeware from www.ei5di.com.  Please
keep a copy of whatever version(s) you're using now - as
insurance!

Please let me know what you'd like to see in the next
update.

73, 
Paul EI5DI