Re: [SD-User] Wrong QSO´s

[Tom Arntzen]

I found that one qso was missing in .ALL file.
I located that qso in .AUD file and copied it and paste it back to .ALL 
file.
I used notepad for this since it is a basic simple texteditor with none 
controlcharacters.
That worked fine.
Took me 15 minutes to figure that out.
SD did now count correct again.
Several EXIT and RESTARTS did not reveal the problem again.

Tom LI1PHA

----- Original Message ----- 
From: "Juan Antonio Teva Córdoba" <jateva at teleline.es>
To: <sd-user at contesting.com>
Sent: Monday, May 30, 2005 8:30 PM
Subject: [SD-User] Wrong QSO´s


This wekkend, I´m using SD 11.22 in WPX. I observed, when edit some qso to 
correct call or serial number, it´s repetead and the qso number is the same. 
There are two qso,s with the same number.
Else, in auto cw mode when touch enter o space keys to play call message, 
there is some delay to play it.


I fun with SD. it´s a big programm.

73 es tnx de EA7KJ.

_______________________________________________
SD-User mailing list
SD-User at contesting.com
http://lists.contesting.com/mailman/listinfo/sd-user