[SD-User] Rig control
Ian Greenshields
ian.greenshields at gmail.com
Fri May 25 12:28:14 EDT 2007
This is a known problem with SD on a number of rigs, including the Ten-Tec
Argo V, Jupiter, Omni VII.
Unfortunately there isn't a solution right now as there is no way in the rig
control file to define the set frequency command.
73 Ian G4FSU
On 24/05/07, H. M. Motley Jr. <hmmjr at comcast.net> wrote:
>
> I have my WinKeyer USB and rig working with SD now except keying in the
> frequency in the call sign area does not change my rig. I have a Ten Tec
> OMNI VII and used the Jupiter set up except I changed the parameters to BPS
> 57600, data bits 8, stop bits 1, parity N. Linktime is 20 and polltime is
> 50. Information is sent from the rig to SD just fine but does not seem to
> happen in the other direction. Any suggestions?
>
> Puck, W4PM
> _______________________________________________
> SD-User mailing list
> SD-User at contesting.com
> http://lists.contesting.com/mailman/listinfo/sd-user
>
More information about the SD-User
mailing list