[SD-User] Ports

[Chr Quale]

Ed;

I was stuck with the same when I got my winkey soldered up. The solution:

In device manager, open the USB-device / advanced [for the detected keyer
hardware] and change the port setting from COM10,11 or 12 to COM3 (or
another unused number between COM1 and COM8). This should give communication
wth the keyer [when choosing COM3 from the pulldown menu in Winkeyer2, which
spans COM1 - COM8].

73 de
Chris / LA8OM


On 8/1/08, Ed -- GW3SQX <g3sqx at edtaylor.org> wrote:
>
>
> Hi folks,
>
> I'm planning to use SD for RSGB RoPoCo this weekend, using my new
> Microkeyer
> with WinKey.  However, I see that SD doesn't recognise my virtual ports
> (10,
> 11 and 12).  I assume it should find these automatically, but maybe I need
> to do something to get it to find them.
>
> Any thoughts?  Thanks.
>
> 73,
>
> Ed, GW3SQX
>
>
> _______________________________________________
> SD-User mailing list
> SD-User at contesting.com
> http://lists.contesting.com/mailman/listinfo/sd-user
>