[SD-User] Escape key

[QUENTIN COLLIER]

Just a quickie to say that this operator at least likes, and intensively uses, the "partial check with fullstop" feature! 

But have never tried the auto insert feature - will do so.

73,



Quin G3WRR 



----- Original Message ----
From: Paul O'Kane <pokane at ei5di.com>
To: sd-user at contesting.com
Sent: Wednesday, 21 January, 2009 6:01:40 PM
Subject: Re: [SD-User] Escape key


----- Original Message ----- 
From: "j.otevrel" <j.otevrel at volny.cz>

> some troubles with Escape function in field CALL.
> In my case no restoring, no clearing. Last time i saw
> it worked ok in vers. 13.37.

It's working here in V14.17, so this may be a keyboard
issue.

Please run SD, and use the SHOW command.  Type any letter,
then press Esc.  In the Score window I see

  SD Sees      Non-Print
  Length      1
  ASCII Value  27
  Scan Code    1
  Code Page    850

Let me know if you have different parameters.

> Another problem i have with Partial Call Check DOT (full stop)
> function. In old DOS versions .. the cursor jumps to the begin
> of the call field and new characters were inserted. Very useful 
> function.

Some people didn't like this feature, and I removed it.
Perhaps I will restore it, because I believe very few
users now know about, or use, the full stop feature for
partial call suffixes.

Please try the auto-insert feature - toggled with the AI
command.  This applies only to OVR mode in the callsign
field, where keystrokes overwrite the character at the
cursor position.  With AI enabled, when you move to the
beginning of the callsign field, the mode temporarily
switches to Insert.  I use this at all times.

73,
Paul EI5DI
_______________________________________________
SD-User mailing list
SD-User at contesting.com
http://lists.contesting.com/mailman/listinfo/sd-user