[SD-User] Post event entry

[Roger Dixon]

 Thanks for the help guys (both on and off list)

The situation:
V14.24 on the shack computer works fine (that solves the problem)
V14.13 on the other computer has the problem - motto don't use this version
on this computer !!

73
Roger - G4BVY

-----Original Message-----
From: g3ory at lineone.net [mailto:g3ory at lineone.net] 
Sent: 09 April 2010 09:55
To: lists at irdixon.plus.com
Subject: Re: [SD-User] Post event entry

Roger,

There was a version of SD that had a bug such that entering the hyphen
caused the date field to erase. I think it was back around V10. You might
just have this duff version.

73 Bob
G3ORY

>----Original Message----
>From: lists at irdixon.plus.com
>Date: 09/04/2010 9:34
>To: "Alex GM3ZBE"<alex at gm3zbe.plus.com>
>Cc: <sd-user at contesting.com>
>Subj: Re: [SD-User] Post event entry
>
>It must be me!!  Typing "09" is fine.  As soon as I type the "-" it
wipes
>the field !!
>Roger
>
>-----Original Message-----
>From: Alex GM3ZBE [mailto:alex at gm3zbe.plus.com]
>Sent: 09 April 2010 09:07
>To: Roger Dixon
>Cc: sd-user at contesting.com
>Subject: Re: [SD-User] Post event entry
>
>Works here!
>e.g enter 09-04-10 for todays date.
>73
>Alex
>
>Roger Dixon wrote:
>>  Guys
>> I have a memory that SD can be used to enter a log after the
event.  I 
>> even thought the command may be "POST".  This gets me to a screen
that 
>> requires the date in DD-MM-YY format.  However, you cannot use the
"-" 
>> character as this wipes the field.  Am I mis remembering or doing
>something stupid?
>>
>> Roger - G4BVY
>>
>> _______________________________________________
>> SD-User mailing list
>> SD-User at contesting.com
>> http://lists.contesting.com/mailman/listinfo/sd-user
>>
>>   
>
>_______________________________________________
>SD-User mailing list
>SD-User at contesting.com
>http://lists.contesting.com/mailman/listinfo/sd-user
>