[SD-User] Ctrl (Keyboard Mode)

[Mike Harris]

Even more testing:

Snapshot of Winkey communication log with PTT enabled and toggling Ctrl:

(PTT LOCK-UP)

> 0004104277:  Log enabled, (urouter v7.7.1)
> 0004104401:  H-TX: 15      [Request WinKey Status]
> 0004104433:  H-RX: C0      [status: WAIT=0, KEYDOWN=0, BUSY=0, BREAKIN=0, XOFF=0]
> 0004104448:  H-TX: 07      [Get Speed Pot]
> 0004104479:  H-RX: 8B      [speed: min+11=21WPM]
> 0004105899:  H-TX: 15      [Request WinKey Status]
> 0004105930:  H-RX: C0      [status: WAIT=0, KEYDOWN=0, BUSY=0, BREAKIN=0, XOFF=0]
> 0004105946:  H-TX: 07      [Get Speed Pot]
> 0004105993:  H-RX: 8B      [speed: min+11=21WPM]
> 0004107397:  H-TX: 15      [Request WinKey Status]
> 0004107428:  H-RX: C0      [status: WAIT=0, KEYDOWN=0, BUSY=0, BREAKIN=0, XOFF=0]
> 0004107459:  H-TX: 07      [Get Speed Pot]
> 0004107490:  H-RX: 8B      [speed: min+11=21WPM]
> 0004108910:  H-TX: 15      [Request WinKey Status]
> 0004108925:  H-RX: C0      [status: WAIT=0, KEYDOWN=0, BUSY=0, BREAKIN=0, XOFF=0]
> 0004108957:  H-TX: 07      [Get Speed Pot]
> 0004109003:  H-RX: 8B      [speed: min+11=21WPM]
> 0004109253:  H-TX: 09 04(05) 18 01      [Set Pin Config: Pin5PTT=0(1), Pin5SideTone=0, Pin3KeyOut=1, Pin5KeyOut=0, HangTime=1.0wordspace, Priority=normal]  [PTT On/Off: on]
> 0004115992:  H-TX: 09 05      [Set Pin Config: Pin5PTT=1, Pin5SideTone=0, Pin3KeyOut=1, Pin5KeyOut=0, HangTime=1.0wordspace, Priority=normal]
> 0004115992:  H-TX: 15      [Request WinKey Status]
> 0004116039:  H-RX: C0      [status: WAIT=0, KEYDOWN=0, BUSY=0, BREAKIN=0, XOFF=0]
> 0004116055:  H-TX: 07      [Get Speed Pot]
> 0004116086:  H-RX: 8B      [speed: min+11=21WPM]
> 0004117599:  H-TX: 15      [Request WinKey Status]
> 0004117630:  H-RX: C0      [status: WAIT=0, KEYDOWN=0, BUSY=0, BREAKIN=0, XOFF=0]
> 0004117661:  H-TX: 07      [Get Speed Pot]
> 0004117693:  H-RX: 8B      [speed: min+11=21WPM]
> 0004119112:  H-TX: 15      [Request WinKey Status]
> 0004119143:  H-RX: C0      [status: WAIT=0, KEYDOWN=0, BUSY=0, BREAKIN=0, XOFF=0]
> 0004119159:  H-TX: 07      [Get Speed Pot]
> 0004119190:  H-RX: 8B      [speed: min+11=21WPM]
> 0004119549:  Log disabled, (urouter v7.7.1)

Snapshot of Winkey communication log with Semi Break-in enabled and 
toggling Ctrl:

(NO PTT LOCK-UP)

> 0004441223:  Log enabled, (urouter v7.7.1)
> 0004442019:  H-TX: 15      [Request WinKey Status]
> 0004442050:  H-RX: C0      [status: WAIT=0, KEYDOWN=0, BUSY=0, BREAKIN=0, XOFF=0]
> 0004442066:  H-TX: 07      [Get Speed Pot]
> 0004442112:  H-RX: 8B      [speed: min+11=21WPM]
> 0004443516:  H-TX: 15      [Request WinKey Status]
> 0004443532:  H-RX: C0      [status: WAIT=0, KEYDOWN=0, BUSY=0, BREAKIN=0, XOFF=0]
> 0004443579:  H-TX: 07      [Get Speed Pot]
> 0004443594:  H-RX: 8B      [speed: min+11=21WPM]
> 0004445014:  H-TX: 15      [Request WinKey Status]
> 0004445045:  H-RX: C0      [status: WAIT=0, KEYDOWN=0, BUSY=0, BREAKIN=0, XOFF=0]
> 0004445076:  H-TX: 07      [Get Speed Pot]
> 0004445108:  H-RX: 8B      [speed: min+11=21WPM]
> 0004446184:  H-TX: 09 04(05) 18 01      [Set Pin Config: Pin5PTT=0(1), Pin5SideTone=0, Pin3KeyOut=1, Pin5KeyOut=0, HangTime=1.0wordspace, Priority=normal]  [PTT On/Off: on]
> 0004450583:  H-TX: 09 05      [Set Pin Config: Pin5PTT=1, Pin5SideTone=0, Pin3KeyOut=1, Pin5KeyOut=0, HangTime=1.0wordspace, Priority=normal]
> 0004450599:  H-TX: 15      [Request WinKey Status]
> 0004450630:  H-RX: C0      [status: WAIT=0, KEYDOWN=0, BUSY=0, BREAKIN=0, XOFF=0]
> 0004450646:  H-TX: 07      [Get Speed Pot]
> 0004450677:  H-RX: 8B      [speed: min+11=21WPM]
> 0004452206:  H-TX: 15      [Request WinKey Status]
> 0004452237:  H-RX: C0      [status: WAIT=0, KEYDOWN=0, BUSY=0, BREAKIN=0, XOFF=0]
> 0004452252:  H-TX: 07      [Get Speed Pot]
> 0004452284:  H-RX: 8B      [speed: min+11=21WPM]
> 0004453703:  H-TX: 15      [Request WinKey Status]
> 0004453734:  H-RX: C0      [status: WAIT=0, KEYDOWN=0, BUSY=0, BREAKIN=0, XOFF=0]
> 0004453766:  H-TX: 07      [Get Speed Pot]
> 0004453781:  H-RX: 8B      [speed: min+11=21WPM]
> 0004454780:  Log disabled, (urouter v7.7.1)

That's my lot you will be pleased to note!

Regards,

Mike VP8NO



On 06/07/2011 13:18, Raymond Phillips wrote:
> Hi Paul
>         My problem still exists.
> The setup I an using is WinXP  SD V15.45 with rig control KENWOOD TS480 and winkey, as I said earlier the minute you hit Ctrl the rig goes into TX and stays there you have to shut the program down for it to go back to RX.
>
> On my other rig ICOM it works fine no problems.
> Anyone using Kenwood with the same problem or is it at my end.
>
> Rgds Raymond GM0VRP
> _______________________________________________
> SD-User mailing list
> SD-User at contesting.com
> http://lists.contesting.com/mailman/listinfo/sd-user
>