[SD-User] Rig Control in V17.06

[Les Allwood]

Not using rig control here, but 9A28HQ is still causing problems! The 
program switches from CW to SSB, changes the band to 10m, then deletes the 
entire QSO when the final enter is input. The only way I found round the 
problem was exiting SD, editing a new QSO into the .ALL file, then 
restarting.

Les, GV3VQO

-----Original Message----- 
From: Bob Bagwell
Sent: Saturday, July 13, 2013 2:03 PM
To: Dave Sergeant
Cc: sd-user at contesting.com
Subject: Re: [SD-User] Rig Control in V17.06

Sort of same here Dave. It doesn't like 9A.

73 Bob


On 13 July 2013 14:50, Dave Sergeant <dave at davesergeant.com> wrote:

> Using 17.07 in the IARU contest, interfaced to my Elecraft K2.
>
> Why when I type 8HQ (as part of 9A28HQ) and press spacebar or enter
> does my rig change to 160m LSB? Nearly lost a QSO... Very reproducible
> here.
>
> 73 Dave G3YMC
>
> On 10 Jul 2013 at 23:50, Paul O'Kane wrote:
>
> >
> > Due to broken code in V17.06, SD did not display
> > the rig's frequency, and B40-style band-change
> > commands did not work with rig-control enabled.
> >
> > This is fixed in V17.07, on the website now.
> > If you don't use rig control, there's no need
> > to update.
> >
> > Please accept my apologies for any inconvenience.
> >
> > SD is free - please tell other contesters.
> >
> > 73,
> > Paul EI5DI
>
> http://www.davesergeant.com
>
> _______________________________________________
> SD-User mailing list
> SD-User at contesting.com
> http://lists.contesting.com/mailman/listinfo/sd-user
>
_______________________________________________
SD-User mailing list
SD-User at contesting.com
http://lists.contesting.com/mailman/listinfo/sd-user