[SD-User] V16.13 Released

[Paul O'Kane]

V16.13         1st March 2013

COM Ports for WinKey & Rig Control:
     Port numbers of 10 or greater are reliably
     supported.

Rig-Control:
     Improved support for older Yaesu rigs, in
     particular FT1000MP, FT817 FT847 and FT897.

     Restored SO2R support - enabled or disabled
     with the 2R command, followed by PORTS to
     assign COM ports and names for the two rigs.
     Toggle between them with the backslash "\"
     key.

     With the callsign field empty, equals "="
     sets the inactive rig to the same frequency
     as the active rig.   Comma "," swaps
     frequencies.  The active rig is indicated
     by R1 or R2 at either side of the date/time
     field.

     In mixed-mode events, the mode on the
     active rig will correspond to the frequency.
     If necessary, use the S (SSB) or C (CW)
     commands to switch.  The X (eXchange)
     command lets you switch sidebands on both
     SSB and CW.  The CW setting is held for
     both rigs across all bands.

     B40, B20 etc, and their equivalents 40M and
     20M, switch the active rig to the new band -
     this may also be done by direct frequency
     entry, for example 14020 or 14183.56.

Commonwealth/BERU Contest:
     Restored as a free and unrestricted option.
___________________________________________


If you find bugs in V16.13, please send me full
details - to pokane at ei5di dot com.  Older
versions are not supported, so please confirm
that the problem exists in 16.13.

Please let me know what you would like to see
changed or added - whether features or new
contests.

73,
Paul EI5DI