[SECC] CW sending from CT or NA

[Joe L Blackwell]

Unless I misunderstand what you are trying to do,
You can key your rig from inside a contest template by
typing TUNE in the callsign field.  ESC to quit.
73,
Joe, aa4nn

On Thu, 15 Nov 2001 11:02:29 -0500 <n4uk@mindspring.com> writes:
>    I have a technical question for those of you who are using NA or 
> CT to send CW from a parallel port. Is there a way to have the 
> program key up the rig without relying on VOX and the transmission 
> of a character first to do this? I built parallel interfaces long 
> ago that send cw from LPT but rely on VOX. THis is not good for the 
> TR relays especially when an antenna relay system, lockout relays, 
> etc are used that add delay to when the amplifier relays are finally 
> keyed up. This causes the RF relays to occasionally be hot keyed 
> which will eventually lead to relay failure. I need to have the rig 
> and all relays keyed first and THEN the CW to be sent a few 
> milliseconds later. Is anyone doing it this way????
> Ken , N4UK
> 
> --
> SECC on the Web:          http://secc.contesting.com/
> Submissions:              secc@contesting.com
> Administrative requests:  secc-REQUEST@contesting.com
> Problems:                 owner-secc@contesting.com
> 
> 

--
SECC on the Web:          http://secc.contesting.com/
Submissions:              secc@contesting.com
Administrative requests:  secc-REQUEST@contesting.com
Problems:                 owner-secc@contesting.com