[SECC] RTTY Help
Jeffrey Clarke
ku8e at bellsouth.net
Sat Sep 24 23:14:28 EDT 2016
Hi,
Playing in CQWW RTTY this weekend and need some help setting up my RTTY interface. Right now I'm using the CW to RTTY function on my Elecraft K3. It's kind of a pain to send with the CW paddle all the time. Plus I can't seem to get the 4 second delay after ending a transmission to go away. The only way I have found to get around this is to program the CW memories in the K3 and send by pushing those buttons. If you program a "|" in the CW memory it disables the 4 second delay in the CT to RTTY mode. For some reason when I send "IM" with the paddle it's not disabling the delay like it should.
I have a Rigblaster Advantage I've been just using for sending CW from the computer. I've unhooked the cable that goes from my computer the to the RS232 on the back - The one you use to do updates to a K3 - and have plugged in the RS232 from the Rigblaster to the K3 RS232 and it works fine doing radio control and sending CW. I also have a cable going from the headphone jack of the K3 to the Line IN of the Rigblaster. I know I'm getting audio to the Rigblaster because I hear it when I hookup my headphones to the speaker out.
For some reason when I start MMTTY or N1MM I can't seem to receive or transmit RTTY. Can someone help? Am I missing something?
Thanks, Jeff
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.contesting.com/pipermail/secc/attachments/20160925/760fd99b/attachment.html>
More information about the SECC
mailing list