[SECC] Free to good home

[Rick Dougherty NQ4I]

Hi All...I have two pieces of Cable TV hardline 3/4 in and both pieces are
nearly 350-400 feet
long...one piece per customer please...here is the deal...the hardline has
two high quality brass fittings/coax connectors on each end and I paid $60
a piece...they come with the hard line free...you will have to come down to
Griffin and roll up your hardline...some is maybe 1 inch below the surface
so a tiny amount of effort is required to get it on the surface...also a
lot of the hardline is taped with electrical tape every 2 feet and that
must be cut...you will need a few fresh rolls of electrical tape to tape
the roll together as you roll it up. so first two callers who call me can
have each a 350-400 ft run of 75 ohm 3/4 dia hardline with very low
loss...you may ask how do I match to 50 ohms? there are two very easy
methods...first is a frequency dependent matching line that would work if
you use the hardline on a single band...second a 75 to 50 ohm balun is
availabe from a number of sources that will allow the hardline to work on
any and all ham bands..so my cell is 678-595-6235.

de Rick
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.contesting.com/pipermail/secc/attachments/20190429/cdfdc734/attachment.html>