Thanks. A beam or turnstile are just not in the cards for my "tree" antennas.  This actually will serve a specific purpose. I have an old Motorola FM rig that does both 10m and 6m with one feedline. The vertical polarization is pertfect in this case. It might not be ideal for 6m CW/SSB as a horizontal antenna is sure to be better for local work. I just have to make sure the balun works correctly up to 54 MHz at a couple hundred watts.   

Mike

On Sep 4, 2009, at 7:57 PM, halken@comcast.net wrote:

Hi Mike,

 

Several folks have told me they built single band versions for 6 meters that worked fine, and I don't see any reason a set of six meter wires could not be added onto one built for the lower HF bands.  I have not tried it.

 

The antenna's real advantage is to get some nice low angle radiation out of an HF antenna that is close to the ground and easy to build.  At 6 meters and above this is so easy to do with a yagi, groundplane, or turnstile I never thought of the N4GG Array as offering much benefit.....

 

73

Hal


----- Original Message -----
From: "Mike / W5JR" <w5jr@bellsouth.net>
To: "SECC" <secc@contesting.com>
Sent: Friday, September 4, 2009 5:47:09 PM GMT -05:00 US/Canada Eastern
Subject: [SECC] N4GG Array on 6m?

Hal, have you ever built/used one of your "N4GG Array" antennas (the  
3/2 wave top fed phased verticals) on 6m?

Seems like it would be an easy add to a 20/15/10 model.

Thanks

Mike
_______________________________________________
SECC mailing list
SECC@contesting.com
http://lists.contesting.com/mailman/listinfo/secc