Just in time for contest season.
Tower is a Force-12 LPT-1242. Structural grade square aluminum tubing, low profile sturdy tower. Because it isn't a standard lattice style tower with guys, it doesn't draw as much attention. (The subdivision it is in has covenant restrictions but no one ever said anything about the tower...your mileage may vary). 42 feet extended. 12-15 feet cranked down. It cranks up and down with a 1/2 horsepower drill that is included. It is currently fastened to the upright of a 2 story deck in Marietta. It can be base mounted with guys as well. I usually leave it extended and have never had any problems with it. It has a flat mount plate at the top that is drilled for different rotors.
This tower is currently $4290 plus $150 crating plus truck shipping from Texas. If you just want the tower, I will let it go for $2500 (drill included)
The antenna is a Tennadyne T6. 12 foot boom, 6 element, 10-,12, 15, 17 and 20 meters. I finished up my DXCC Honor Roll and Challenge with this antenna at 42 feet.
This antenna is $692 new plus shipping. If you just want the antenna, I will let it go for $450.
The rotor is a Ham IV (actually a Ham III that was upgraded to Ham IV by that fellow over in Alabama) and comes with an EZ-Rotor serial interface so you can interface it to your computer/logging program). The Rotor-EZ is $164 uninstalled. The Rotor-EZ also adds "Point-and-Shoot" capabilities to the Ham-IV.
A new Ham IV is $649. If you just want the Rotor/Rotor-EZ and cables, I'll take $350 for it.
All that adds up to $3300, separately. If you want the whole package, I will let it go for $3000.
I have plans for (at least one) larger tower(s) at the new digs in the woods over here so I've decided to sell the package in Marietta instead of moving it.
Email me back if you are interested or call me on my cell at 404-457-9075.
73, Tad, WF4W
--
"What a long, strange trip it's been"
The Grateful Dead
Truckin'