[SEDXC] Free Vertical Mast and Items for Sale

[John Baranyi]

*** Free ***

30 ft by 6 inch diameter aluminum pipe with 2 inch steel pipe stub affixed
to one end and a 16 x  18 inch steel plate on the other.  This was the
rotating mast for my Rohn 45  90 ft tower and most recently was the bottom
section of an 80 meter guyed vertical.   Free for the taking.  I am located
near the junction of I-75 and I-40.  Weighs about 70 lbs.  Now that the
double peak is over, get ready for 80 meters next season!

For Sale:  all lengths are approximate.

12 ft x 3 inch x 0.125 wall (2 pieces)  $40 each

12 ft x 2.5 inch x 0.058 wall (2 pieces)  $25 each

12 ft x 3 inch x 0.25 wall (1 pieces)  $50 each

AB-577 portable mast, insulated guys, plus extras, excellent condition, will
hold 4 element 40 meter beam and rotator for guyed field day installations.
K6SE and K6NDV use two of these for 160 meter phased verticals.  See
http://www.topband.net/cqww/cqww.html  $475

ComTek 20 meter 4 square.  4 x 20 meter verticals, ComTek Switching System
(ACB-20), 4 new phasing lines, dummy load, 175 ft Davis RF BuryFlex w/PL
259s.  Note:   ComTek box can be modified for 40, 80, or 160.  $450

20 ft x 6 inch sections of aluminum with 10 inch hex face heliarced onto
each end (sections bolt together).  12 sections for 80 or 160 meter four
square.  These were part of a OTH Radar system at Johns Hopkins Applied
Physics Lab per W3LPL.  $50 per section

AMP Supply LK-500ZB HF amp with accessory PAC-5 PW Dahl Transformer in
separate 45 lb case!  1350 out.  New unused 3-500ZG tubes (2) no air time!
Just checked out at Omega Electronics.  As New.  $1200


John B.  N8UM  Oak Ridge, Tennessee