[SEDXC] Alliance HD-73 Rotor HELP!!

[Weymouth Walker]

Rich ... "Norm's Rotor Service" is still in business ...
they are in Birmingham, and I had them refurbish my
HD-73 about a year ago ...

They re-worked both the rotator and the control
unit ...

http://www.rotorservice.com/

73, Wey ...
K8EAB

On 4/18/2011 4:17 PM, Rich Arland wrote:
> I have finally located a roof tower and a small Cushcraft A3S tri-bander. I also have an Alliance HD-73 rotator that is in need of some TLC. I need to get both the rotator and the control box into a shop that specializes in rotator repair/refurbishing to clean it up, lube it and insure that it is working prior to me climbing on my roof (I really don't do well with heights!) and putting things together.
>
> About 18 or so years ago I used Norm's Rotator Service in VA (if I remember correctly) and he completely went over an old HyGain HAM-M w/control box for me. That rotator was in constant use from 1995 until 2007, when I moved to GA. Never had a problem. I was wondering if there was some place like "Norm's" here in the Atlanta area that did this sort of work?
>
> Pls contact me off-list. Tnx.
>
> One other thing.....does anyone have a light duty 3 or 4 element 6M Yagi they would be willing to part with at a reasonable cost? If so, QSO me off-list.
>
> vy 73 es tnx
>
> Rich Arland, K7SZ
> "Cogito Ergo CQ" ("I think therefore I HAM")
> Author: "The ARRL's Low Power Communications, the Art and Science of QRP" (all 3 editions)
> Editor: "QRP POWER", QST Magazine (Jan 2000 to Dec 2003)
> Editor: "The Learning Curve", CQ Magazine
> Editor: "The Beginner's Column", CQ-VHF Magazine
>
>
>
>
>
>
>   		 	   		
> _______________________________________________
> SEDXC mailing list
> SEDXC at contesting.com
> http://lists.contesting.com/mailman/listinfo/sedxc
>
>