[SEDXC] [sedxc] The new Tower is up at WF4W's

[Jerry Pereira]

Wow!! Absolutely impressive! I need to come to your QTH to work the really
tough ones !
Jerry - K4KBL

On Sunday, February 2, 2014, Tad Williamson <tadwf4w at gmail.com> wrote:

>
>
> I attached the last 6 sections this weekend,  4 sections yesterday and two
> today.  I checked/snugged all the bolts one more time just to make sure,
> then.....I threw the switch and watched.   It went up without a hitch.  It
> made a little different noise as it went through about 45 degrees, but it
> didn't seem to change the movement.
>
> I fastened a piece of square aluminum tubing with an eyebolt near the top
> and ran a rope through it.  After the tower was all the way up, I moved my
> OCF to there.
>
> I've still got he rotor, cables and antennas to mount, but it's nice cause
> I can mount all that on the ground and then raise it back up.
>
> The rotor plate doesn't want to fit where I think it should, so I'll
> contact Heights tomorrow for advice.   No big thing, I know it will
> eventually mount.
>
> It's a Heights Tower Systems 76'  Aluminum tower, that, according to
> specifications is supposed to be able to lift 330 pounds mounted at the end.
>
> Here's a link with the  pictures from beginning to end.
>
> https://www.dropbox.com/sh/dwg83pi20f5qbny/G6PrLmCOs9
>
> 73, Tad, WF4W--
>
>
>
>  __._,_.___
>   Reply via web post<http://groups.yahoo.com/group/sedxc/post;_ylc=X3oDMTJxcGU5aWhpBF9TAzk3MzU5NzE0BGdycElkAzQxNjk4MjgyBGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAMzNzI0BHNlYwNmdHIEc2xrA3JwbHkEc3RpbWUDMTM5MTM4OTA0MQ--?act=reply&messageNum=3724>  Reply
> to sender
> <javascript:_e(%7B%7D,'cvml','tadwf4w at gmail.com?subject%5Cx3dRe:+The+new+Tower+is+up+at+WF4W%5Cx27s');>  Reply
> to group
> <javascript:_e(%7B%7D,'cvml','sedxc at yahoogroups.com?subject%5Cx3dRe:+The+new+Tower+is+up+at+WF4W%5Cx27s');>  Start
> a New Topic<http://groups.yahoo.com/group/sedxc/post;_ylc=X3oDMTJmb3Blc2hjBF9TAzk3MzU5NzE0BGdycElkAzQxNjk4MjgyBGdycHNwSWQDMTcwNTA2MzEwOARzZWMDZnRyBHNsawNudHBjBHN0aW1lAzEzOTEzODkwNDE->  Messages
> in this topic<http://groups.yahoo.com/group/sedxc/message/3724;_ylc=X3oDMTM1YW8yMzB0BF9TAzk3MzU5NzE0BGdycElkAzQxNjk4MjgyBGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAMzNzI0BHNlYwNmdHIEc2xrA3Z0cGMEc3RpbWUDMTM5MTM4OTA0MQR0cGNJZAMzNzI0>(1)
> Recent Activity:
>
>    - New Members<http://groups.yahoo.com/group/sedxc/members;_ylc=X3oDMTJnbGhrMnJpBF9TAzk3MzU5NzE0BGdycElkAzQxNjk4MjgyBGdycHNwSWQDMTcwNTA2MzEwOARzZWMDdnRsBHNsawN2bWJycwRzdGltZQMxMzkxMzg5MDQx?o=6>
>    3
>
>  Visit Your Group<http://groups.yahoo.com/group/sedxc;_ylc=X3oDMTJmMmYzNHRyBF9TAzk3MzU5NzE0BGdycElkAzQxNjk4MjgyBGdycHNwSWQDMTcwNTA2MzEwOARzZWMDdnRsBHNsawN2Z2hwBHN0aW1lAzEzOTEzODkwNDE->
>  [image: Yahoo! Groups]<http://groups.yahoo.com/;_ylc=X3oDMTJlcjZiaGJrBF9TAzk3NDc2NTkwBGdycElkAzQxNjk4MjgyBGdycHNwSWQDMTcwNTA2MzEwOARzZWMDZnRyBHNsawNnZnAEc3RpbWUDMTM5MTM4OTA0MQ-->
> Switch to: Text-Only<javascript:_e(%7B%7D,'cvml','sedxc-traditional at yahoogroups.com?subject%5Cx3dChange%2BDelivery%2BFormat:%2BTraditional');>,
> Daily Digest<javascript:_e(%7B%7D,'cvml','sedxc-digest at yahoogroups.com?subject%5Cx3dEmail%2BDelivery:%2BDigest');>*
> Unsubscribe<javascript:_e(%7B%7D,'cvml','sedxc-unsubscribe at yahoogroups.com?subject%5Cx3dUnsubscribe');>* Terms
> of Use <http://info.yahoo.com/legal/us/yahoo/utos/terms/>
>    .
>
> __,_._,___
>