[SESprint] Re: [SESprint]

[jswoods@usit.net]

NA logging setup for the Sprint

Check the "use sprint exchange"
Then you will just edit F2 to delete the call at the end of the line
the F2 will only need   #  NAME  STATE
(probably edit the CQ msg F1 also to you preference)

Then when you operate the Sprint use F1 to call CQ
and use F4 to S&P

AND use the insert key to send the exchange
and the program will automatically place your call at either
the beginning or end of the exchange depending if you called
CQ or did F4 (S&P)

the "secert" is to always use the insert key to send the exchange

Load up the program and do a few dummy runs and be sure the
function keys do what you think they should

Steve  NA4K


Bob Patten wrote:

> Jim White wrote:
>
> >
> > What occurred to me as the Sprint got rolling was there were essentially
> > two different exchanges used depending on whether you were Cqing or
> > responding to a CQ...how do you guys handle this? It seems F2 the
> > standard home for your exchange is fine say for the CQ responses... what
> > about programming F3 for the exchanges in response to another's CQ?
> >
>
> Same basic question here.  I'll be logging with NA and I see it has a
> box to check for "use sprint format".  But how to actually prgram F2 and F3?
>
> --
> 73,     Bob Patten, N4BP                Plantation, FL
>
> E-Mail: n4bp@netzero.net                Website: http://www.qsl.net/n4bp
> QRP ARCI #3412    SOC #1    ARS #799    Whiners #6   FISTS #7871
>
> -------------------------------------------
> Introducing NetZero Long Distance
> Unlimited Long Distance only $29.95/ month!
> Sign Up Today! www.netzerolongdistance.com
> _______________________________________________
> SESprint mailing list
> SESprint@contesting.com
> http://lists.contesting.com/mailman/listinfo/sesprint