[Skimmertalk] CW Skimmer 1.4

[Richard L. King]

Thanks to everyone who offered suggestions for help. They were all 
useful and pointed me in the right directions. I seem to have fixed 
the problem now.

I was using a homemade cable between the LP-Pan unit and the E-Mu 202 
and it was screwed up somehow. I went to Radio Shack today and bought 
two cables, each with a 1/4 in plug on one end and a 1/8 in plug on 
the other. After plugging the new cables everything started working great.

The old cable was one I had modified from using with the internal 
sound card before I bought the E-Mu 202.

Looking good here now. Thanks to all.

73, Richard - K5NA



At 18:26 1/20/2009, Pete Smith wrote:
>I think you may need to reverse the I and Q signals - physically, 
>going to the sound card.
>
>73, Pete N4ZR
>
>  At 12:46 PM 1/20/2009, Chad WE9V wrote:
>>Put the K3 into REVerse CW mode, I think.
>>
>>Chad WE9V
>>
>>On Tue, Jan 20, 2009 at 6:54 AM, Richard L. King <k5na at ecpi.com> wrote:
>> > I am trying to get Skimmer, LP-Pan, an E-Mu 202 sound card, and 
>> a K3 set up.
>> >
>> > When I tune the radio, all the signals move the wrong way on my
>> > Skimmer screen. Something is tuning backwards.
>> >
>> > It is weird that when I tune towards a signal, it moves away from me.
>> >
>> > Any ideas?
>> >
>> > 73, Richard - K5NA
>> >
>> > _______________________________________________
>> > Skimmertalk mailing list
>> > Skimmertalk at contesting.com
>> > http://dayton.contesting.com/mailman/listinfo/skimmertalk
>> >
>>_______________________________________________
>>Skimmertalk mailing list
>>Skimmertalk at contesting.com
>>http://dayton.contesting.com/mailman/listinfo/skimmertalk
>