[Skimmertalk] Switching antenna quickly between RIG + Skimmer to RIG only (RX to TX)

[Pete Smith N4ZR]

Hi Andy - Does your radio have RX antenna out and in jacks?  That plus a 
splitter is the absolutely safest approach to using your main antennas 
for skimming.  You could also use your radio's PTT out (used for 
controlling your amp) to switch the input of your Ensemble SDR to ground 
whenever you transmit, though I would be a little worried about timing 
in that case, for fear of getting RF across the relay before it finished 
switching.

73, Pete N4ZR
The World Contest Station Database, updated daily at www.conteststations.com
The Reverse Beacon Network at http://reversebeacon.net, blog at reversebeacon.blogspot.com,
spots at telnet.reversebeacon.net, port 7000 and
arcluster.reversebeacon.net, port 7000


On 5/31/2012 2:34 AM, Andreas Hofmann wrote:
> Hi,
>
>
>
> I would like to be able to use the same antenna for skimming and working the DX with my rig.  Currently, I have a manual coax switch in reverse, but I am worrie that I forget to switch.
>
>
>
> 95% of the day, skimmer is on and listening on the antenna.
>
> When I step into the shack I would like to be able to listen on both the HF rig (K2) and skimmer, so skimmer continues.
>
> When I want to work something, I am looking for something really easy to disconnec the skimmer temporarily from the antenna.
>
>
>
> I think I saw a pdf somewhere, but I cannot find it anymore. Anyone suggestions?
>
>
>
> Thanks
>
> Andreas, KU7T
>
>
> _______________________________________________
> Skimmertalk mailing list
> Skimmertalk at contesting.com
> http://dayton.contesting.com/mailman/listinfo/skimmertalk
>