[Skimmertalk] SDR-IQ boundaries

[Bob Wilson, N6TV]

FYI the CW Skimmer band plans are defined in

Windows XP:  C:\Documents and Settings\*userID*\Application
Data\Afreet\Reference\BandPlan.ini
Windows Vista/7/8:    C:\ProgramData\Afreet\Reference\BandPlan.ini  ?

73,
Bob, N6TV

On Wed, Feb 6, 2013 at 9:44 AM, Bob Wilson, N6TV <n6tv at arrl.net> wrote:

> By default, CW Skimmer ignores all signals in the predefined "RTTY
> segments" (as well as beacon frequencies like 14.100).  That is what the
> colors indicate.
>
> To change that, use View -> Settings -> Misc tab -> Decode only in the CW
> segments (uncheck) or set the "Band Plan" to "CW Contest".
>
> 73,
> Bob, N6TV
>
> On Wed, Feb 6, 2013 at 4:56 AM, KD7YZ Bob <kd7yz at denstarfarm.us> wrote:
>
>> Hello Skimmertalk people:
>>
>> I call it a boundary for want of a better term.
>>
>> I have a  screen-shot  which makes this  question will appear a lot more
>> logical.  http://tinyurl.com/begy22t
>>
>> What I see on the screen, of CWSkimmer, is a dashed line and color
>> change at "070". The "Tune" says 28072.47 fwiw. I am using SDR-IQ and
>> looking at the IF of my K3. The latter is running the 6m transverter.
>>
>> Skimmer "Settings" uses SDR-IQ @ 192kHz.  The, greyed out, LO is
>> 28082470 .
>>
>>
>> I have Aggregator set to add 22000 for the RBN
>>
>> Anyway, the question is, at "067" I am decoding "DE WZ8D/B".
>>
>> At "072.5" I am seeing, and mentally decoding, W9DR/B" , over and over
>> for ten minutes a good signal. Yet it does not decode on Skimmer.
>>
>> So then, what setting do I need to set to have Skimmer see, say, from
>> 50.0 to 50.1 ??
>>
>> thanks for listening.
>>
>> --
>> de Bob KD7YZ
>>
>> _______________________________________________
>> Skimmertalk mailing list
>> Skimmertalk at contesting.com
>> http://dayton.contesting.com/mailman/listinfo/skimmertalk
>>
>
>