[Skimmertalk] Image frequencies falsely reported using QS1R

[Timothy Coker]

I am running 192khz with a Clifton Labs pre-amp like N6TV and yourself Rich.

I wonder if I was online transmitting during a contest during those times
you saw it? I often will let the QS1R run with pre-amp using a dipole
oriented 90 degrees offset (but only 6' vertically spaced) from my TX
antennas using LP or HP without grounding the input of the QS1R.

Always up for anyone letting me know if they see any spot issues so I can
improve the setup.

73,

Tim / N6WIN.
http://www.n6win.com

On Thu, Feb 14, 2013 at 3:10 PM, Rich Hallman - N7TR <rich at n7tr.com> wrote:

> I have seen this before.....using 192 kHz sample rate with a preamp.
> Would be interested if others are seeing this.    I've noticed the N6WIN
> skimmer spot me on wrong frequencies in the past and was worried I had
> harmonics...but it was never on a harmonic from where I was operating.
>
> 73. Rich. N7TR
>
> On Feb 14, 2013, at 2:17 PM, "Bob Wilson, N6TV" <n6tv at arrl.net> wrote:
>
> > Today my Skimmer Server 1.3 is reporting stations on both the "right"
> > frequency, and the *wrong* frequency, due to some type of signal image
> > issue that I haven't noticed before:
> >
> > N6TV <http://www.reversebeacon.net/qrz/rbn/N6TV>
> > RU0ZM<http://www.reversebeacon.net/qrz/rbn/RU0ZM>
> > 28019.2 CW CQ15 dB 24 wpm 2157z 14 Feb
> > N6TV<http://www.reversebeacon.net/qrz/rbn/N6TV>
> > RU0ZM <http://www.reversebeacon.net/qrz/rbn/RU0ZM> 28162.8 CW CQ11 dB 24
> > wpm 2157z 14 Feb
> >
> >
> > N6TV <http://www.reversebeacon.net/qrz/rbn/N6TV>
> > P40L<http://www.reversebeacon.net/qrz/rbn/P40L>
> > 28160.4 CW CQ [LoTW]20 dB 38 wpm 2155z 14 Feb
> >
> >
> >
> >
> >
> > N6TV <http://www.reversebeacon.net/qrz/rbn/N6TV>
> > P40L<http://www.reversebeacon.net/qrz/rbn/P40L>
> > 28021.6 CW CQ [LoTW]22 dB 37 wpm 2151z 14 Feb
> >
> >
> > This is using a QS1R attached to a Pixel RF-Pro1A 8' high, with a Norton
> > pre-amp; I don't think it's a signal overload issue.
> >
> > The only thing that has changed recently is that I'm using Aggregator
> > version 2.4, though I don't think that has anything to do with it.  I
> > selected my normal "Contest Rotation" .ini file.  Maybe I need to limit
> the
> > CW range to frequencies below 28.150 in the that .ini file?  Or lower the
> > "LO" frequency?
> >
> > Has anyone else seen and cured this problem when using a QS1R with
> Skimmer
> > Server set for 192 kHz bandwidth on 80 - 10m?
> >
> > 73,
> > Bob, N6TV
> > _______________________________________________
> > Skimmertalk mailing list
> > Skimmertalk at contesting.com
> > http://dayton.contesting.com/mailman/listinfo/skimmertalk
> _______________________________________________
> Skimmertalk mailing list
> Skimmertalk at contesting.com
> http://dayton.contesting.com/mailman/listinfo/skimmertalk
>