[Skimmertalk] Frequency calibration

[K1TTT]

My skew report in the aggregator shows no data on any band... where are you
seeing skew notices??

David Robbins K1TTT
e-mail: mailto:k1ttt at arrl.net
web: http://wiki.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://k1ttt.net


-----Original Message-----
From: Paul Higginson [mailto:paul_group at greenrover.demon.co.uk] 
Sent: Friday, February 15, 2013 21:30
To: wes.cosand at gmail.com
Cc: skimmertalk at contesting.com
Subject: Re: [Skimmertalk] Frequency calibration

I can confirm that I have been receiving incorrect skew notices.

Regards Paul

GW8IZR

------- Original message -------
> From: Wes Cosand <wes.cosand at gmail.com>
> To: skimmertalk at contesting.com
> Sent: 15.2.'13,  20:34
>
> Hey folks:
>
> I thought our frequency calibration differences had pretty well 
> diminished and that I was in the middle of the pack.  But the last 
> couple of days I have been getting Skew Data notices in Aggregator 
> that I am off freq on 10 meters.  I adjusted a little but are we 
> really off that far?
>
> Does anyone have the instrumentation and expertise to do a rigorous 
> calibration of their unit so that we can just match them.  I am 
> compulsive enough that I would like to know I was correct.
>
> Wes, WZ7I
> _______________________________________________
> Skimmertalk mailing list
> Skimmertalk at contesting.com
> http://dayton.contesting.com/mailman/listinfo/skimmertalk

_______________________________________________
Skimmertalk mailing list
Skimmertalk at contesting.com
http://dayton.contesting.com/mailman/listinfo/skimmertalk