[Skimmertalk] qs1r sharing?

[W3OA]

Also the device name in both ini files must specify the correct number 
for the Tee.

On 1/8/2015 3:19 PM, David Robbins wrote:
>
> Yeah, I did that… I copied the 3 lines for center freqs and also for 
> selected segments from the cw skimmer to the rtty skimmer ini file 
> again just to be sure, and still get the same message.
>
> David Robbins K1TTT
> e-mail: mailto:k1ttt at arrl.net
> web: http://wiki.k1ttt.net <http://wiki.k1ttt.net/>
> AR-Cluster node: 145.69MHz or telnet://k1ttt.net <telnet://k1ttt.net/>
>
> *From:*W3OA [mailto:w3oa at roadrunner.com]
> *Sent:* Thursday, January 08, 2015 19:50
> *To:* David Robbins; skimmer at dxwatch.com; skimmertalk at contesting.com
> *Subject:* Re: [Skimmertalk] qs1r sharing?
>
> Hi Dave -
>
> The center frequencies must also match.
>
> 73 - Dick, W3OA
>
> On 1/8/2015 2:03 PM, David Robbins wrote:
>
>     Well, I think I am getting closer… I downloaded the latest
>     cwsl_tee, and a bunch of other tools from the ol5q repository… and
>     I get different error messages now. instead of telling me it can’t
>     get the usb port now I get a cut off message about SetRXFrequency
>     not being able to change L0 from 28091399 to 28091281 for… and
>     there it gets cut off.
>
>     I did go through and make sure the cw and rtty skimmer ini files
>     have the same segments and rate selected… what else is there???
>
>     David Robbins K1TTT
>     e-mail: mailto:k1ttt at arrl.net
>     web: http://wiki.k1ttt.net <http://wiki.k1ttt.net/>
>     AR-Cluster node: 145.69MHz or telnet://k1ttt.net <telnet://k1ttt.net/>
>
>     *From:*Felipe Ceglia [mailto:felipeceglia at gmail.com]
>     *Sent:* Thursday, January 08, 2015 17:30
>     *To:* David Robbins
>     *Cc:* skimmer at dxwatch.com <mailto:skimmer at dxwatch.com>
>     *Subject:* Re: [Skimmertalk] qs1r sharing?
>
>     Hi David,
>
>     I dont really know, I never used it, as my skimmer pc is a bit
>     slow for that.
>
>     Maybe you can try contacting OL5Q guys directly.
>
>     73,
>
>     Felipe
>
>     On Thu, Jan 8, 2015 at 3:24 PM, David Robbins <k1ttt at arrl.net
>     <mailto:k1ttt at arrl.net>> wrote:
>
>     Ok, I tried the old cwsl_tee, which doesn’t appear to be on the
>     web site any more… which one do I need and how to set it up for
>     both the skimmers??
>
>     David Robbins K1TTT
>     e-mail: mailto:k1ttt at arrl.net
>     web: http://wiki.k1ttt.net <http://wiki.k1ttt.net/>
>     AR-Cluster node: 145.69MHz or telnet://k1ttt.net
>
>     *From:*Felipe Ceglia [mailto:felipeceglia at gmail.com
>     <mailto:felipeceglia at gmail.com>]
>     *Sent:* Thursday, January 08, 2015 13:42
>     *To:* David Robbins
>     *Cc:* skimmer at dxwatch.com <mailto:skimmer at dxwatch.com>
>
>
>     *Subject:* Re: [Skimmertalk] qs1r sharing?
>
>     Hi Dave,
>
>     You must use a software from these guys:
>
>     http://ol5q.nagano.cz/soft.php?page=Software
>
>     It creates a tee and will let both softwares run.
>
>
>     73,
>
>     Felipe
>
>     On Thu, Jan 8, 2015 at 11:03 AM, David Robbins <k1ttt at arrl.net
>     <mailto:k1ttt at arrl.net>> wrote:
>
>     how do you set that up, if I have skimmerserver running and I try
>     to start the rtty server it complains about not getting the usb
>     port.  The same going the other way.
>
>     David Robbins K1TTT
>     e-mail: mailto:k1ttt at arrl.net
>     web: http://wiki.k1ttt.net <http://wiki.k1ttt.net/>
>     AR-Cluster node: 145.69MHz or telnet://k1ttt.net
>
>     *From:*Prasad VU2PTT [mailto:vu2ptt at gmail.com
>     <mailto:vu2ptt at gmail.com>]
>     *Sent:* Thursday, January 08, 2015 12:45
>     *To:* David Robbins
>     *Cc:* skimmertalk at contesting.com
>     <mailto:skimmertalk at contesting.com>; skimmer at dxwatch.com
>     <mailto:skimmer at dxwatch.com>
>     *Subject:* Re: [Skimmertalk] qs1r sharing?
>
>     David
>
>     Yes, both run seamlessly using the same QS1R - my RBN node is
>     doing that right now. In effect we can run 7 x CW and 7 x RTTY
>     receivers on one QS1R with more CPU power required of course.
>
>     73 de Prasad VU2PTT
>
>     On Thu, Jan 8, 2015 at 6:10 PM, David Robbins <k1ttt at arrl.net
>     <mailto:k1ttt at arrl.net>> wrote:
>
>     Is it possible to share a qs1r between cw skimmer server and the
>     new rtty
>     skimmer server?
>
>
>
>     David Robbins K1TTT
>     e-mail:  <mailto:k1ttt at arrl.net <mailto:k1ttt at arrl.net>>
>     mailto:k1ttt at arrl.net <mailto:k1ttt at arrl.net>
>     web:  <http://wiki.k1ttt.net/> http://wiki.k1ttt.net
>     AR-Cluster node: 145.69MHz or <telnet://k1ttt.net/
>     <http://k1ttt.net/>> telnet://k1ttt.net <http://k1ttt.net>
>
>
>
>     _______________________________________________
>     Skimmertalk mailing list
>     Skimmertalk at contesting.com <mailto:Skimmertalk at contesting.com>
>     http://dayton.contesting.com/mailman/listinfo/skimmertalk
>
>
>
>
>     -- 
>
>     73 de Prasad VU2PTT, W2PTT (ex-AF6DV)
>
>     ARSI, ARRL, FOC, CWOPS, 5BDXCC
>
>     NCDXF, INDEXA, SCCC, EUPSK, MARC
>
>     ARRL DXCC Card Checker
>
>     Contest & Awards Manager - ARSI www.arsi.info <http://www.arsi.info/>
>
>     Coordinator - VU Contest Group www.vucg.org <http://www.vucg.org/>
>
>     Webmaster - Logger32 www.logger32.net <http://www.logger32.net/>
>