[Skimmertalk] CW Skimmer won't decode

[W5IO]

TNX Andrew
Alex rmailed that it would take either a change in logging programs or uncheck the "only work in cw segments" in setup.
Which I did for now.
73
Maury


Sent via the Samsung Galaxy S™III, an AT&T 4G LTE smartphone

<div>-------- Original message --------</div><div>From: Andrew O'Brien <k3ukandy at gmail.com> </div><div>Date:08/13/2016  1:13 PM  (GMT-06:00) </div><div>To: Maury Guzick <w5io at sbcglobal.net> </div><div>Cc: skimmertalk at contesting.com </div><div>Subject: Re: [Skimmertalk] CW Skimmer won't decode </div><div>
</div>Use DDUTIL and VSPM . Configure a few paired ports .  I can send you my configuration in a few hours when I get home .  I think I set up pairs 4 14, 5 15, 6 16 .  


Sent from my iPhone

> On Aug 12, 2016, at 10:33 PM, Maury Guzick <w5io at sbcglobal.net> wrote:
> 
> Hi to the group and sorry if this problem is not new. Just found this group and trying to set up the rig.
> 
> Unless my Flex 3000 is connected via CAT to the CW Skimmer the decoders will not work. The CW shows on the water fall, but 0 decoders.
> 
> I want to be able to use my logging program and capture the frequency from the Flex but then CW Skimmer quits working so I have to turn Logger CAT off to get CW Skimmer to work.
> 
> Royal Pain!
> 
> Any solutions?
> 
> TNX
> 
> 73
> W5IO
> _______________________________________________
> Skimmertalk mailing list
> Skimmertalk at contesting.com
> http://dayton.contesting.com/mailman/listinfo/skimmertalk