[Skimmertalk] CwSkimmer 1.8 problems

[David Robbins]

What operating system is it and how much ram does it have??

 

David Robbins K1TTT
e-mail: mailto:k1ttt at arrl.net
web: http://wiki.k1ttt.net <http://wiki.k1ttt.net/> 
AR-Cluster node: 145.69MHz or telnet://k1ttt.net:7373

 

 

From: Mark Sihlanick [mailto:n2qt.va at gmail.com] 
Sent: Friday, May 13, 2016 14:29
To: David Robbins
Cc: skimmertalk at contesting.com
Subject: Re: [Skimmertalk] CwSkimmer 1.8 problems

 

thanks to N6TV, N4ZR, and K1TTT for suggestions.

 

Yesterday, I ran chkdsk with no issues, so figured I'd run the memory test as well, I mean how

long could that take?  Well about 8-9 hours later it was done with no complaint. 

 

The CwSkimmer.exe is in the program files location and as shown in its properties it is configured to

run as administrator.  I open it by double clicking on the .exe

 

I can initially edit the skimmer ini file and save it.

 

After the system ran over night, and with the system apparently working, (I could get telnet

responses from it) I attempted to edit the ini file again but this time Notepad Indicated "Not

enough memory is available to process this command".  I then went to open the event log,

which gave the Microsoft Management Console error:

 

MMC cannot open the file C:\windows\system32\eventvwr.msc.

 

I attempted shutdown after this which was incomplete after 5 minutes or so, and since the disk

access led had stopped flashing I power strobed it.

 

After restart I looked through the event log. It didn't like my incomplete power down, complained

about not being able to start Xonar U5, which I had removed from device manager and uninstalled

days ago, and some week old disk access issues reported by the audit process.  

 

I don't know enough to find the smoking gun, if there is one, in the event log.  

 

It is possible this problem has nothing to do with cwskimmer, and is just a system instability. I may

try leaving the system up with nothing running and see if the memory bleed occurs on its own.

 

In the meantime, I've got another old dual core I'll try to get going.  With two systems, I can get 

twice as confused at a faster rate. This is all for a second 6M skimmer to catch e skip season.  

 

Mark n2qt

 

 

On Thu, May 12, 2016 at 7:26 AM, David Robbins <k1ttt at verizon.net> wrote:


that sounds more like windows is running out of memory or some other resource.  I would bring up the resource monitor before you start the skimmer and watch it while you open and close it a few times.  also check the event log to see if it has more information or other errors like disk access problems. 



May 11, 2016 07:12:35 PM, n2qt.va at gmail.com wrote:

ok this is driving me nuts. 

I have a new install of Win 10 Pro 32 bit, new install of CWSkimmer 1.8 all on an older dual core Dell Optiplex 755.

The CWskimmer is set to run by Administrator when it is invoked. I start it from its file location to avoid using a shortcut
that may complicate things. 

Everything works, can shut and restart CWskimmer . . . until it doesn't. This can be in time duration from a couple to many
hours, it never runs more than a day. There is generally no complaint and it runs fine until I try to shut it down.

The failure message when trying to shutdown CwSkimmer is:

Unable to write to 
C:Users\skimmer\AppData\Roaming\Afreet\Products\CwSkimmer\CwSkimmer.ini

my user account (the only one on this machine) is skimmer to explain that.

I cannot end the CWskimmer task by clicking close or the Red X box. If I do a ctrl-alt-del to get to task manager to 
close it there, I get this error:

The sign-in process couldn't display security, and sign-in options when Ctrl-Alt-Delete was pressed. If Windows doesn't
respond, press Esc, or use the power switch to restart. 

Esc doesn't do anything, left clicking the WIndows Icon in the lower left of the screen does nothing but right clicking the
Windows icon does open that menu and give the option to shut down, which it does.

Restarting, everything is good, can shutdown and restart CwSkimmer at will until it doesn't.

I assume I have some privilege violation that comes up over time, but I don't have a clue. Only other thing on this machine
that may be questionable is the Quartet soundcard. This card is an orphan and I'm running the last beta release driver for it.
I like how this soundcard works, but will replace it with something else if there are no other suggestions. 

Mark n2qt



Mark. N2QT

_______________________________________________
Skimmertalk mailing list
Skimmertalk at contesting.com
http://dayton.contesting.com/mailman/listinfo/skimmertalk