[Skimmertalk] No visible callsign list in CW Skimmer ?

[Andrew O'Brien]

Thanks, I only have one monitor BUT used to have two.  I'll change the ini
file and see if that fixes things

Andy


On Thu, Nov 23, 2017 at 9:23 PM, Bob Wilson, N6TV <n6tv at arrl.net> wrote:

> Perhaps I misunderstood your question. If you toggle *View* -> *Callsign
> list* in the CW Skimmer menu, you should see a window open and close.
> Perhaps it has moved to the left or right edge of the screen or to a second
> monitor, and you're having trouble seeing it.
>
> If you still can't find it, select *Help* -> *Data Folder*.   Edit
> *CwSkimmer.ini*.  Exit from CW Skimmer.  In the CwSkimmer.ini file, look
> for these lines and change them to:
>
> CallsDialogLeft=0
> CallsDialogTop=0
>
> Save the change to the .ini file and restart CW Skimmer.  The callsign
> Windows should now be quite visible.
>
> 73,
> Bob, N6TV
>
> On Thu, Nov 23, 2017 at 9:10 PM, Bob Wilson, N6TV <n6tv at arrl.net> wrote:
>
>> From the CW Skimmer menu, select *Commands* -> *BLIND Mode*, and make
>> sure that it is NOT checked.
>>
>> BLIND mode was created for folks who are operating a contest in the
>> "Unassisted" category, where using a waterfall display is OK as long as no
>> automatically decoded callsigns are displayed.
>>
>> 73,
>> Bob, N6TV
>>
>> On Thu, Nov 23, 2017 at 8:18 PM, Andrew O'Brien <k3ukandy at gmail.com>
>> wrote:
>>
>>> I am no longer able to see the callsign list in CW Skimmer, everything
>>> else
>>> is working as expected.  I checked for hidden windows , examined the task
>>> view etc, but no sign of it.  I am using a fresh install of CS Skimmer
>>> 2.0
>>> .  Callsigns ARE being received and displayed on the right side panel ,
>>> just not in the usual list.   Running Windows 10 .  Any suggestions ?
>>>
>>> Andy K3UK
>>> _______________________________________________
>>> Skimmertalk mailing list
>>> Skimmertalk at contesting.com
>>> http://dayton.contesting.com/mailman/listinfo/skimmertalk
>>>
>>
>>
>